Force 150 Hp

Discussion in 'Powerboats' started by RAY SCOTT, Sep 28, 2011.

  1. RAY SCOTT
    Joined: Sep 2011
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: HULL UK

    RAY SCOTT New Member

    Hi My Force 150 Hp Outboard Keeps Spinning The Key Way Is There Any Way Or Any Thing To Keep It Tight I Have A Little Chip On The Crank And Filled It With Lock Tight I Am Also Going To Try Lock Tight 605 ? Bearing Not Sure Wot The Name Of It Is Tonight
    Regards Ray
     
  2. Mr Efficiency
    Joined: Oct 2010
    Posts: 10,386
    Likes: 1,042, Points: 113, Legacy Rep: 702
    Location: Australia

    Mr Efficiency Senior Member

    What, the flywheel key is broken or missing ?
     
  3. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Is the nut at the end falling off?
     
  4. RAY SCOTT
    Joined: Sep 2011
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: HULL UK

    RAY SCOTT New Member

    NO CHIP OUT THE CRANK SLOT FLYWHEEL SPINS TORK IT DOWN TO 85 LD TRYING 120 LB TONIGHT AND PUTTING LOCK TIGHT ON IT
     

  5. RAY SCOTT
    Joined: Sep 2011
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: HULL UK

    RAY SCOTT New Member

    GOT A NEW KEY JUST NEED TO LOCK THE TAPERD SHAFT TO THE FLY WHEEL
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.