2610 concept Motorsailer

Discussion in 'Boat Design' started by valery gaulin, Aug 18, 2020.

  1. valery gaulin
    Joined: Jan 2017
    Posts: 177
    Likes: 4, Points: 18, Legacy Rep: 7
    Location: Montréal

    valery gaulin Senior Member

    My interpretation of a 26' X 10' Motorsailer. Draft keel down 6.5' keel up 2.5'. Displacement 6 500-7000 lbs. Keel bulb 1300 lbs, Keel plate 1 700 lbs, total keel = 3000 lbs. Sail area 375 sq. ft. It is a center cockpit open concept. The galley will be in the open cockpit area. In the forward cabin at the bow will be the head with shower, right behind will be a pullman double berth with a large dresser closet. The aft cabin will be a double berth. Basically the living area will be in the large center cockpit area with a dimension of 7' X 9' approximately.
     

    Attached Files:

    Last edited: Aug 19, 2020
    bajansailor likes this.
  2. kapnD
    Joined: Jan 2003
    Posts: 759
    Likes: 104, Points: 43, Legacy Rep: 40
    Location: hawaii, usa

    kapnD Senior Member

    That’s remarkably shallow draft!
    What’s the plan for the motor?
     
  3. valery gaulin
    Joined: Jan 2017
    Posts: 177
    Likes: 4, Points: 18, Legacy Rep: 7
    Location: Montréal

    valery gaulin Senior Member

    Just change from inch to feet for the draft!!! For the motor I am not sure yet, I think 15 to 25 hp would be good. Outboard as its simplicity but diesel inboard under the center cockpit sole could be the way to go! I am interested to know more about the new Hatz d-serie air cooled with the silent cover version. It seams that in Europe use them as Marine application for small boat! Engine is still open for discussion....
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.