1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

25’ Deep V Offshore Style Boat Mold For Sale

Discussion in 'Boat Molds' started by Michael B, Jan 11, 2022.

  1. Michael B
    Joined: Oct 2021
    Posts: 1
    Likes: 0, Points: 1
    Location: Ontario Canada

    Michael B New Member

    I have a 25’ deep V offshore style boat mood for sale. The molds are production ready and in perfect condition. Pipe re-enforced and heavily built. They have only had 11 boats made from them, and have been stored covered and inside, they have never sat outside, or had water or weather in them. They are like brand new ! They have a full cabin design and where made with either single engine or twin engine set ups. $ 7500
     

    Attached Files:

  2. captbone
    Joined: Jun 2021
    Posts: 2
    Likes: 0, Points: 1
    Location: Long Island, NY

    captbone New Member

    Hello. What is the beam on the hull? 8ft or 8.5ft?

    How would we get it to the USA? Specifically NY?


    Thank you for your time.
     
  3. Michael B
    Joined: Oct 2021
    Posts: 1
    Likes: 0, Points: 1
    Location: Ontario Canada

    Michael B New Member

    They could be trucked to you without too much problems, we sold and shipped boats all over the US for years. What part of NY ? The city or upstate ? They are 8’ beam
    Thanks
    Mickael
     
  4. captbone
    Joined: Jun 2021
    Posts: 2
    Likes: 0, Points: 1
    Location: Long Island, NY

    captbone New Member

    Thank you for the fast reply. We are located on Long Island. We would only need the hull mold as we want to try our hand at center consoles.
     
  5. Michael B
    Joined: Oct 2021
    Posts: 1
    Likes: 0, Points: 1
    Location: Ontario Canada

    Michael B New Member

    Hi, no problem, we could get it to Long Island, it’s in like new condition with no fading, oxidization or anything. It would be a great hull for CC’s, just need a new deck / cockpit liner
    Thanks
    Michael
     
  6. Cobra1
    Joined: Feb 2008
    Posts: 85
    Likes: 0, Points: 6, Legacy Rep: -2
    Location: Az

    Cobra1 Junior Member

    They should float right across the St. Lawrence, you wouldn't have to dick with customs at the bridge. Massena, waddigngton, both have nice ramps, covered with snow.
     
  7. edward PS
    Joined: Mar 2022
    Posts: 0
    Likes: 0, Points: 0
    Location: morganton nc

    edward PS New Member

    HI Michael, did you ever get these sold ? if not I'm interested. would need a zip code and need to ask a few questions if they are available .Thanks
     
  8. Michael B
    Joined: Oct 2021
    Posts: 1
    Likes: 0, Points: 1
    Location: Ontario Canada

    Michael B New Member

    Hi,
    Yes, these are still available. I’m in Ontario, postal code N0E1M0 but they can be shipped to the USA no problem, I’m only 2 hours from the border and deal with it all the time. Where are you ?
    Let me know any questions you have, Thanks
    Michael
     
  9. edward PS
    Joined: Mar 2022
    Posts: 0
    Likes: 0, Points: 0
    Location: morganton nc

    edward PS New Member

    can you refresh my memory as to what the molds are off of ? i enquired on a lot the last week ..pictures etc thanks
     

  10. Michael B
    Joined: Oct 2021
    Posts: 1
    Likes: 0, Points: 1
    Location: Ontario Canada

    Michael B New Member

    Hi Edward, I’m sorry I don’t recall getting a message from you last week ? I do have pictures of them and one of the boats pulled from the molds on this listing. There are a number of small molds included with it, 2 swim deck molds, 1 for single engine, 1 twin engine, rear sun deck hatch, floor molds, deck hatch molds, rear seat form ect plus all the patterns for stringers ect.
    Please let me know any other questions you have
    Michael
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.