1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

20' and 21' boat molds

Discussion in 'Boat Molds' started by marlo2010, Jan 2, 2011.

  1. marlo2010
    Joined: Nov 2010
    Posts: 11
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA

    marlo2010 Junior Member

    I misstated, I have the two cuddy cabin molds (hull, deck, maybe stringer molds) one is like 20'8" and the other 21'6". I also have the 21'6" open bow molds. Make me an offer. The center console hull mold , no deck mold (maybe a stringer mold) and then 2 different center console molds.
     
  2. marlo2010
    Joined: Nov 2010
    Posts: 11
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA

    marlo2010 Junior Member

    picture of center console hull, this was after I pulled it out of the shed, it is just dusty in the picture. As stated earlier, they aren't perfect, but with a good cleaning and maybe 1/2 days work they would be ready for work.
     

    Attached Files:

  3. WaveWarrior
    Joined: Jul 2011
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florida

    WaveWarrior New Member

  4. marlo2010
    Joined: Nov 2010
    Posts: 11
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA

    marlo2010 Junior Member

    These molds were moved outside after winter (about 6 months ago). They will not be making their way back inside and I hate to see them ruined. They are in the Midwest, and I will sell them cheap to someone who is interested.
    My definition of cheap is like $50 per piece, which is essentially covering my cost to help load them up. Again I would rather see them used than ruined. If you have a way to haul them and can do it in a timely manner, let me know. I will be cutting the steel frames off for scrap and landfilling the molds in the near future if no one is interested.
     
  5. fisherman_kk
    Joined: Jan 2007
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: California

    fisherman_kk Junior Member

    I have asked for a reply a couple of times. I'm interested in all the molds you have. I'd like to get some pics of the hulls and parts that come out of these molds. Please contact me at kklamann2@hotmail.com
     
  6. WaveWarrior
    Joined: Jul 2011
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florida

    WaveWarrior New Member

    Marlo,

    Please send me an email with contact info and we work on picking them up.

    Thanks,

    Jeff
    wavewarrior@live.com
     
  7. marlo2010
    Joined: Nov 2010
    Posts: 11
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA

    marlo2010 Junior Member

    fisherman-kk
    I have tried to respond to your requests and they must not be getting thru. The only hull for a fishing style center console is the 21', and I only have the hull. I have two different center console (helm) molds though. There is a picture on here of it. I do not have any pictures of completed products.
     
  8. WaveWarrior
    Joined: Jul 2011
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florida

    WaveWarrior New Member

    Marlo,

    Can't seem to contact you through this forum on PM, send email to be able to contact you back. Thanks again: wavewarrior@live.com
     
  9. m3mm0s rib
    Joined: Aug 2011
    Posts: 132
    Likes: 3, Points: 18, Legacy Rep: 57
    Location: GREECE

    m3mm0s rib Senior Member

    The price is funny There is a problem;
     
  10. mkirshy
    Joined: Jan 2012
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: south carolina

    mkirshy New Member

    molds wanted

    do you still have molds please let me know what u have if so
     
  11. marlo2010
    Joined: Nov 2010
    Posts: 11
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA

    marlo2010 Junior Member

    I still have the two 21' hulls and decks (one hull no longer has the steel structure), a 20' CC hull mold, and a 20' cuddy cabin hull and deck. There are two stringer molds and two center console molds, don't know if they are for these or not. I have started to scrap and get rid of this stuff (about half of what I had is already gone) so the list is getting smaller. All the molds are in OK condition, all could be repaired and used for production. Any one of the pieces could be used as is to make a new plug today. The 20' center console hull and the two center console molds could be cleaned and waxed an used for production today.
     
  12. mkirshy
    Joined: Jan 2012
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: south carolina

    mkirshy New Member

    pictures

    do you have pictures and what do you want for them? if you have time give me a call at 843-260-3462 thanks
     
  13. marinediesels
    Joined: May 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florida

    marinediesels New Member

    Hi, do you still have any of your molds for sale? please send a list pics and prices to info@marinemanagerscorp.com also location, weight and dimensions if possible so I can calculate shipping cost. Thanks, Justin
     
  14. mitchellboats
    Joined: Jul 2006
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: florida

    mitchellboats Junior Member

    boat molds

    Do you still have the center console mold.
     

  15. mitchellboats
    Joined: Jul 2006
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: florida

    mitchellboats Junior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.