14m cockpit Eu A

could anyone design this for me, for a fee of course

 

Welcome to the Forum William.
Is this an AI generated photo, or a photo of an actual boat?
I am guessing it is probably around 14 m / 45' long?

There are many designers who could design a boat like this for you - but the cost would be considerable for a one off vessel.
Not to mention the cost of building a new vessel like this.

Your proposal looks very similar to the Doggersbank motor yachts designed / built in Europe - here is a link to some for sale.
https://www.yachtworld.com/boats-for-sale/make-doggersbank/

And this one looks very similar to what you want - she is for sale for approx US$ 127,000.
The cost of designing and building a custom motor yacht like this and the same size today would be at least 10 or 15 times the asking price.
https://www.yachtworld.com/yacht/1973-doggersbank-502a-9449863/

 

yes right, Roy Humphreys 1999
I know the costs
I only need lines, offsets
Structure I am well qualified to do
thank you so much for reply

 

I need aft cockpit, fish, dive, most Euro boats have that aft cabin, guessing they neither, swim, fish ,dive or have a cook up in that cockpit

 

To give you a body lines plan that allows you to build a safe, well-sailing boat, many calculations are required, some of them very laborious. No one can do that "for free."
Instead of asking "someone to design this for me," you should ask someone who has the original plans for a boat that's already built and tested to give them to you (any intellectual property issues?)

 

I said NOT for free, I have built many yachts, 9m trailer boats, commercial boats, all in metal I am searching for designs already built, Thank you

 

@william stokes, I humbly apologize; I was completely mistaken. I read "free" instead of "fee."
Having clarified my error, if you can't find a pre-made design and need to use a new one, I'd like you to consider my options for participating in that design.

 

B&G Yacht Design - Boat Plans - Corruira 42

 

Of course someone could.
Do you mean someone from the Forum?

So, what's the question?

 

yes and I pay

 

Ok all good, I know what I want, I just can not draw it and it frustrates no end and despiter folk saying boat design is complex, the tools are there to make sure it is going to work I have maxsurf I only produced on planing boat there

 

Easy

 

maybe for you ole son but not for me, put me on a stick or mig welder or lathe, ok

 

OK, so you already have the Maxsurf 3D model. What else do you need? That should allow you to create almost the complete project for your boat.

 

well, I have to start from scratch, AI drew that planing boat in aRhino 5 many years ago, really I need the lines and upper works drawn pretty much the same as the Humphreys in the photo
I wrote to Humphreys but they never replied.
I would buy that boat she's for sale in NZ 280000 NZ dollars, but she is composite and as I know zilch abt that sticky stuff I a pass
Aluminium is my choice and I am lkg for builders in Asia