structural

Finite Element Analysis for Marine Structures https://navalapp.com/courses/finite-element-analysis-for-marine-structures/ This course covers theoretical and practical aspects of FEA applied to structural analysis. In the theoretical section, you will explore concepts like material resistance...

Hello I am replacing the main bulkhead in a 1975 Ranger 26 because it was rotted through. I have cut the new piece based on the old piece, except that the few inches near the hull was rotted through and I can't get an exact shape. I have found mixed information about the space between the...

It seems to be a common theme that on large plate boats both sides of the hull seams are welded. Which makes sense due to a lack of penetration on thick plate say .25" or thicker. When looking at small Jon boats with thin sheets they are only welded on the outside. When doing some research I...

We are fresh start up, yacht manufacturing company based in Turkey. We aim to produce finest quality composite motoryachts in range between 28ft to 50ft. As a good classic modest start we plan to manufacture 28ft open centre console t top motorboats. The preliminary design has been already...

Hello dear Boatdesigners, I am trying to find some existing solutions on how to connect deck with superstructure with or without flybridge in GRP boats, how to ensure structural integrity and how to define laminate plan for sides and GRP structure inside superstructure? Are there any pilars or...

Hi all, Wondering if anyone would be able to share any structural midship drawings for offshore supply/support operations vessels. I've done a lot of poking around google and I've found bits and pieces, but nothing really complete. I've asked in here before about a tugboat midship section and...

I was wondering if this is possible to repair. The engine fell off when the last owner hit a pot hole and it looks like it took alot of fiber glass with it. Is it possible to fix? Or maybe completely replace with a wooden transom. I would like it to support a 150hp Yamaha vmax. Or will this area...

I am representing a client in Virginia who is in need of ship designers of all levels for an ongoing shipbuilding project. There are over 80 design openings with the following requirements: Eligible to Obtain Secret Security Clearance. Minimum: Associates Degree or 2 Years of relevant...

Assuming medium weight to mean CAD tools like Rhino for hull design and perhaps Maxsurf for hydrostatic analysis, what is available for designing interior structural framing, testing the design, moving lateral frames further apart and retesting, then spitting out NC cut files to send to the...

hi, does anyone have a guide or tutorial regarding constructing detail structural design (eg: adding cutouts, stiffener, hull girder, bracket, etc) using shipconstructor. i'm currently on project to construct a vessel structural members using shipconstructor. The primary structure members (eg...

Designing 13' diameter round "plate" that will be suspended by three anchors around the perimeter (it will serve as area cover for rain/sun - like a contemporary gazebo). Using epoxy + fiberglass over Extruded Polystyrene (XPS) Rigid Foam and would like to have thin profile while still being...

Hello Everyone, I am doing a analytical / simple numerical approach for the structural components in the marine Stern roller. Now, I am looking for the some references or methodology for getting the optimum dimensions (Thickness) of Ring frames and Disc component. So, it would be very grateful...

Hi there, I'm currently working on my interim report for my 4th year project on the structural analysis of naval ships as a result of underwater explosions. My original plan for the modelling stage was to create a detailed model of the midship section in Rhino and then import it into ANSYS...