mold

looking for a 14ft flats boat mold along with all the materials you need to build the first skiff out of it. Send me what you have will trade for a drz110 dirtbike or send me the cash price

Hi everyone, I wanted to ask for some advice on various types of molds. I'm building an R3-class skiff and I'm having a hard time deciding on the mold. In the past, I've used wood and then filled it. This time, I was thinking about a foam mold, but I'm not sure which one to use. I'm also open to...

30' center console molds available. 3 piece design, all hatches double sided, finished console liner. All molds high end Marine Concepts built. Approximately 50 parts pulled. Rental/royalty arrangement available. Molds are in South Florida. Please PM for more info. or call 305 394 0284

I have a complete 20 ft Bay boat mold set for sale, including hull mold, one piece deck/liner/cap mold. Console mold, hatch molds. Including a demo boat on the molds. Asking $30,000.

I have a 17 ft poling skiff mold set for sale. Includes Hull mold, one piece deck, liner and cap mold. Hatch molds, console mold. Can be Tiller setup as well. Includes one complete boat as demo. Asking $30,000

Hello, My investment group is currently looking to buy a Center Console Boat Mold between 33' and 37', we are currently building on the west coast of Mexico. We would provide pick up anywhere in the continental USA. Currently building 26' center consoles and are wanting to expand business...

Good morning all, I have a question and I'm pretty sure you will have the answer for it. Besides iron and invar, which is the best material to produce a mold for autoclave (around 90psi pressure and 130ºC temperature) if I want it to last around 40 cicles? After 40 cicles, the part design may...

Have a 21 feet (6.4 m x 2.5m) mold with centre console mold. Build in Sweden, hull shape same as Nimbus 22, Coronet 22 and Ryds 23 DC. Good condition. No deck mold or stringer. There is a casted hull in the mold for protection and that can be used for boat build. Location: Stockholm Sweden.

So I have a mold for a part that I have pulled 8 or so parts from... all going perfectly. Currently I apply one coat of wax before each part. However after pulling a part last light I noticed some of the red tooling gelcoat seemed to transfer over to the parts white gelcoat. I was able to...

Hi all, I made 8 molds in the past all using wood as this was the only one that knew how to work with but is a very slow process. I now have a new design (for a 17.5 foot kayak) which has been converted to a 3D. My idea is to use a CNC to print it in foam and then make the mold from it. As I...

Looking for center console boat molds in decent shape. 19+ feet also interested in bass boats and small parts molds. email josh@cfsknox.com

Hi all, I want to extend an existing small mold (it is a kayak rim) about 2cm on a specific area as outlined with the red marks in the attached image. I'm looking for opinions about the recommended way to achieve this. The mold is about 9mm thick made with gelcoat and chopped mat and polyester...

Hi all, Do you have any tips on releasing a plug from the mold? It is a kayak mold, 5.3 meters long and 56 cm wide at is middle section; front and rear very narrow just to get an idea about its size. Usually is very easy to release the flanges and front/rear but more difficult in the middle...

Hi all, I'm looking for a plug/mold builder located in Europe. If there is anyone please get in touch with me. Thanks

Hi Im looking for some V mold, 39 - 40 - 41 -42 - 43 - 44 - 45 ft More than 10’ beam. Center console or cruiser boat. Tks Arthur

I am looking for either a repco 21, sisu or comparable mold.

Hi all, I'm in the process of building a new mold for a sea kayak (around 5.5 meters length and 56cm wide) and I would really appreciate your thoughts on the following. I need to make the mold as light as possible but obviously to be strong enough. I've already made the plug and polished to A...

Looking for a skiff mold, anywhere from 12 foot to 18 foot. I'm interested in just about anything like this so if you have something let me know.

Hi all, I build a mold for a sea kayak a while ago but due to zero experience in laminating before, I end up with a really good product (the kayak) but a very "problematic" mold. Let me explain a little bit about that. There are many bubbles in the mold which every 2-3 releases they popup and...

Complete mold ready to building Console mold Hull mold Liner mold Cap liner 305-815-2293