I am in the early stages of a big project to build a liveaboard from a 34' enclosed lifeboat. It is currently powered by a 70hp Sabb diesel with...
We have decided to install lithium batteries. We have also decided which Lithium batteries we are going to buy. We have consulted an electrical...
Hi everyone, let me start this thread with description how we adapted electric car lithium module for boat use. This is how it looks finished:...
I've had a look around the forum and there are a number of older threads that look like they might be useful but I guess those were conversations...
What would be the average energy consumption, range and running hours with different speeds (slow, cruising and max)? What would be a right size...
Use screw holes and self tapping screws to mount the fan in place to the bottom side of the Batt box cover.
Using a 12 volt computer fan, and a Vetus vent, bore a hole thru the center of the cover.
Purple covers protect SLAVE boards on cells. Each cell pack has 4 LiFe PO cells with a dedicated slave board to monitor voltage and temperature,...
Blue Seas Batt Box houses two (2) 100AH LiFePO4 Cell packs, for a total of 200 AH capacity (they are wired in parallel). Slave Boards connect via...
Modify a Vetus vent by cutting out the inside section, to promote air flow thru the fan.