I wanted to start this thread to document progress on this project and also discuss and gather links/information on the subject of efficiently...
We have decided to install lithium batteries. We have also decided which Lithium batteries we are going to buy. We have consulted an electrical...
Use screw holes and self tapping screws to mount the fan in place to the bottom side of the Batt box cover.
Using a 12 volt computer fan, and a Vetus vent, bore a hole thru the center of the cover.
Purple covers protect SLAVE boards on cells. Each cell pack has 4 LiFe PO cells with a dedicated slave board to monitor voltage and temperature,...
Blue Seas Batt Box houses two (2) 100AH LiFePO4 Cell packs, for a total of 200 AH capacity (they are wired in parallel). Slave Boards connect via...
Modify a Vetus vent by cutting out the inside section, to promote air flow thru the fan.