jet boat

Hi everyone, I am in need of complete project for aluminium powerboat. It should include everything needed for fabrication: welding details, craddle design if necessary, details etc. Preferably proven and tested design in the marine environment. Length - 17 to 21ft, preferably closer to the...

Good morning, I will be beginning another build this winter. I plan to build a bateau GV11. I will be grafting in a yamaha 650cc jet pump and engine after completing hull to plan specs. Plans call for 1/4" ply for bottom/sides and 3/8 ply for transom and support frames/seats. I would...

Seeking guidance on building my own inflatable raft with 50/35 outboard motor with a jet on it. New hunting plans have my family wanting to go up and down the Yukon which has many shallow fingers and weaves. Thinking 840D Dual sided TPU coated nylon. Rigid or soft hull? Preferably tunneled to...

I saw an old post on this, but with no resolution I could find. I have the same problem with my 97 Sea Rayder F16 120XR. It seems a lot of people do, but no solution I could find. I have to turn 1/4 right to go straight and I can see the jet is shooting right so it is following the steering...

I have been pondering a while with the idea of building a small boat of aluminium. I have never build a boat before, and have slight welding and fabricating skills. The idea for now is purely conceptual. My idea was to make a jet boat. It seemed however that jets are quite expensive, so most...

Hi I am looking for advice on designing a jet boat. My son lives on a shallow river and has been introduced to the idea of building a 12/13 ft Jet Boat. He has a couple of friends who race them so wants to make and race his own. We have purchased a 3D CAD package Solidworks. I have experience...

The link is to the Ocean Jet Boat operating on the Gold Coast in Australia. High Speed Jet Boating Gold Coast - Ocean Jet Boating https://www.oceanjetboating.com/ Ok so i am wondering who designed and built this boat? Is it a modified production boat or a completely custom build? If it is a...

Hey everyone, my family used to own and operate GMC Cobra Jet from Milwaukee, WI in the late 1970s. I am currently looking for our old boat molds and would appreciate any help or tips in tracking down these old molds. We had a total of 5 different ski boats we made. We made a 16 &18 low pro, 16...

Hi We have inherited a 6.5 meter 1500 Kg Rescue Boat, AluSafe MOB (man over board) 700RB. It has an aluminium Hull and the sponsons and Hull are filled with foam. It has a Volvo Penta TAMD 31 p a turbo diesel that puts out 149hp. Cruises at 25 knots and top speed a bit over 31knots. We are...

New here figured I'd share my current project. Started with a 15 ft aluminum hull with a small outboard. Marinized a '05 4.8l gm LS V8 engine. Mounted a Berkeley 12jc pump with a trim nozzle in the boat. Have done a lot of welding in reinforcements and I'm almost ready to weld in the stringers...

etude jet dayboat

etudes jet loc

I have a Hartley custom built glass and timber hull type. Stage 2 Hamilton jet unit. 6 cylinder ford 200 motor 120hp, with heat exchanger. And gal. Dipped tilt trailer for as sale. Australia

I was recently in Wisconsin Dells and had the pleasure of being able to enjoy a fast ride on one of the Jet Boat Adventure boats. There are video of them here at Jet Boat Adventures http://www.jetboatadv.com/ . They are able to stop extremely fast and spin 360 degrees. When travelling and...