Hi All, I'm an engineer at a company where we produce offroad expedition vehicles. We are vacuum infusing our fibreglass parts, but we are having...
[ATTACH] I am considering trying to do infusion on this part. Probably a few layers of woven roving and biaxial; around 8mm thick glass. I am...
Hi guys , i saw this video on the internet. And just wondering what is this ? And what it is for ? they applied those coat after gelcoat? Fyi ,...
I am building a 46ft power cat. The design and the method are by Derek Kelsall (many thanks to Derek for both). I have built a multihull dinghy...
This video is one of the better quality ones I have seen, showing a step by step infusion process for a small canoe hull. In particular, the 2...
In "A Cleaner, Faster Infusion Shop," an article in the February/March 2020 Professional BoatBuilder magazine, Aaron Porter describes how foiling...
Hello! I'm about to vacuum infuse some hatches for my sailing school. Will be using Pro-Set INF epoxy with fiberglass. Question is - how do I...
Hello guys, This is my first time posting in the forum, i've been reading a couple of interesting threads that gave some new ideas that i would...
I am wetbagging currently. My resin losses are around 30 percent or so on large parts with triax; less with biax, but still high. I’d like to...
Interior looking aft.
Interior looking forwards. Fresh water tank is built in under the bunk.
View of the cockpit area when the deck was first fitted to the hull. The mass of the complete deck is just under 200 kg and features carbon skins...
Carbon Cube 36' One Design Full Carbon Infusion Technology
