My eyes just pop out seeing the cover of the next Wooden Boat No. 297 (March-April). This boat is a foiling hull developed jointly by the English...
The start of the race is for November 8, the website is : Site Officiel du Vendée Globe 2020 - Vendée Globe https://www.vendeeglobe.org/fr All the...
This guy is only 5'4" at the same scale of the concept model(1.5"=1'). See the thread for more images of WOLFMAN. He's helpful in getting a...
Upside down view of retracted foils. Rudder foil above bottom(right side up). Main foil flush with bottom and tips designed to try to prevent them...
WOLF is designed to be an extremely comfortable, easy to sail foiler that can take off in a 5-6mph wind. The boat is 14.8'LOA and 16' wide using a...
View shows sliding seats that allow the single crew to move outboard 1.75', hydroturf on cockpit sole, mast step and endplate. Rotating mast is...
This is the actual pattern I made for the sailmaker and which I couldn't resist putting on the boat just to see how it looks. It's 1900...
Sailed in very light air-never picked up more than the 2mph it was when we got to the site. Moved and tacked very well for such light air. Check...
This is a Curved Twisted Surface Piercing T-Foil- or Ctwist batfoil for short. It is an experimental foil to be tested on the D4Z RC cat and on...
These are more pictures of the boat with no writing superimposed on the picture. These were taken on her first day of full flying foiling-only her...
Concept for a small foiler monohull dinghy. Strong RM from asymetric daggerboards/rudders.
You know, its often said, that a boat floating right on its waterline is well designed. Well, the little red line you see on the main foil was put...
The conditions were terrible for this stage of testing but I sailed anyway-and am learning a lot because of it. I had a blast and the boat did...
here are the pics of the SR-71 monofoil, it was designed to a design I've been working on for a 4 meter monofoil trap boat class (SR-71) , it will...
