fishing boat

- Lenght (hull/boat): 5356,27/5405,90 (mm) - Beam (hull/boat): 2324.07/2400.78 (mm) - Thickness: 3/4 (mm) - The waight of the boat without engine: *aluminium parts: 416.27 (kg) *aluminium profiles: 50.11 (kg) - Transom height: 550 (mm) - Deadrise at transom: 17 (degree) - Fuel tank...

- Total lenght (hull /whole boat):4700/5106.58 (mm), - Beam (hull/whole boat): 2100/2190 (mm), - Thickness of the side/bottom: 3/3 (mm), - The weight of the boat without engine: *aluminium parts: 356.78 (kg), *aluminium profiles: 32.16 (kg), - Transom height: 508 (mm), - Deadrise at...

Wavewalk's new S4 Duo microskiff is a 1376 ultralight skiff (200 lbs) that can be split within seconds into two ultralight 38" wide S4 Microskiffs that can be used independently for boating or paddling. The S4 Microskiff is a twin-hull that weighs 100 lbs, and one person can car-top it when...

Hello everyone, I am Mumu and rn i am dealing with a 10 meter sportive fishing boat design. i am studying BA in industrial design so my knowledge about boats is very limited. I am not a student of faculty of engineering and didn't take any lessons about boats. i am kinda lost in here. i want to...

I am working on my first ever design and build. I have worked for freeman Boatworks for a couple years, and wanted to get started with a flats boat. I’ve already designed the hull using Shapr3D, but would appreciate any advice. My first question is how to calculate the scantling for this boat...

While I have not worked out every detail yet the project has begun: It started with realizing that I have built enough flat bottom boats to know that I don’t need another. Also, I’ve done enough jigless boats, and all are slightly crooked in a way that is noticeable to me. This one has a jig...

hello! Im a Naval Architect student. I have a project which is to create a fishing vessel. I badly needed a lines plan or body plan of a fishing vessel at least 30 meters long. Thank you and keep safe always!

40’ Corsa / Offshore Center Console/ Race boat molds . A proven hull design for 40 years . These boats won many Championships back in the day due to it being built as a blue water wave crusher . Most have been converted to Center Console’s and shipped around the world for tour ride operation’s ...

Hey all, new here and very possibly posting in the wrong spot. I've posted on a few other forums with little to no luck. Commercial fishermen/women, boat builders. What's your preferred hatch cover? I'm currently on a waitlist for 50'x32' build and would need upwards of 14 access ways to under...

Hey! Looking forward to getting some feedback as I go to work on a major project. I’ve been into woodworking for forty plus years, and dabbled in boat building over the past 23 years. My most notable project was an 18 ft. decked canoe (cedar strip). Loved the way it turned out in both beauty...

I have a set of 17 Flats boat Molds for sale complete with a start of a hull and deck and all the hatches are complete. Also have 2 deck layouts for it, 2 console molds, and a jet boat set up for it. $20,000 obo Bobby 239-289-2580

About me Since I was a kid I have enjoyed DIY and making things. I don’t have experience in boat building so I don’t feel comfortable building entirely from scratch, so I am considering buying a basic RIB or SIB and modifying it to add some features for fishing and comfort whilst improving the...

This is a conversion of a wooden fishing vessel. The boat is from Scotland, built 1958. It is listed as a national historic ship in the UK. Here is the link: Name Comrades | National Historic Ships https://www.nationalhistoricships.org.uk/register/974/comrades We are planning to...

I kindly reach to the forum for ideas for the most efficient design for the following project: I will build a small wooden boat with local fishermen community that can NOT afford fiberglass or the use of engines, the boat will be used in the Coastal caribbean waters for two persons and fishing...

I'm building a 5-6 person fishing boat that I'd like to imitate an old viking boat. I'd like to combine the two designs to make an extra wide fishingboat/faering. I'm drawing plans to have is 18 feet long from end to end and 6 foot 6 inch wide beam. I'm thinking it'll look like someone sawed the...

Converting a 37 foot deltaga from a gillnet boat into a halibut, live cod and prawn boat.

I have never built a boat before and I want to make a basic one-person flat-bottom wooden jon boat for fishing on calm lake and river waters this summer. Since this is my first boat, I want to be really careful and make sure I do it right. I have found various instructions online, but I can't...

I just got an aluminum boat it is a 1996 spectrum pro avenger 16 sc with and enclosed transom but the transom wood is rotten. The transom is enclosed and welded closed. It looks like a big job i am from canada and would cost a lot to have it done professionally. I was looking into doing it...

Hi All, Can anyone provide me the damage stability criteria of fishing vessel(Deterministic approach). Vessel length is 40 m. Regards Adarsh

Hi all, I have a GRP simulated-clinker boat which is proving difficult to identify. It has no ID plate