china

The rudder was laminated in marine plywood; fiberglass&epoxy sheated; smart JEFA Denmark bearings system

after two years under works in Bucharest, she is soon to sail back to the Mediterranean

5m RIB Inflatable with twin 40hp 2 stroke Sail Outboard motors, All new 2006 rigid hull inflatable boat which has a Fiber glass hull with hatch up front for anchor and 4 chambers for the Pontoons on the sides, it is being sold as a complete package and has centre bench seat to one side and...

I designed and built this boat

This lobsterboat hull motorboat I designed and built was perhaps the only such craft ever made here to have been sold & exported to the American continent. Here in his home Carribeans

back in 1999

we over-built? this Pilot Cutter 32 ft LOD hull in routered strip planking to 2 1/2". Douglas fir under LWL; and White Spruce topsides; barbed bronze nails fastened ; glued in West System epoxy + three layersx3mm mahogany veneer.

Pilot Cutter epoxy strip planking and cold molded; was built in Institutul de Ape Bucharest Romania 1999; for American Randy willard.Rudder laminated. Spars were laminated in white spruce.No engine was installed.fastenings siliconic bronze.Bulwarks cold molded mahogany.

the deck and cockpit are sandwich teak/epoxy/pvc foam; cockpit backrest in laminated mahogany. the glass sheating method proved quite labor&materials intensive.

Clear coated Mahogany cabin sole; mahogany tops and sides berths ; Moonlight opening ports; Stainless hardware teak@epoxy louvered door at forward bathroom compartment

it was before the advent of digital camera revolution. I designed the interior of this boat in a classic style. Looking aft through companionway doors made in teak (center); on both sides mahogany louvered doors cabinets; wich on the other side of the bulkhead act as consoles.

mahogany top charts&cofee desk teak louvered doors and hatch composite console portside sliding cold molded lateral windows opening front windows mahogany

I designed twin consoles into the bathroom at the forward section of the hull ; supporting the sink and acting as an extension of the bed on the cabin side of the bulkhead. the bulkhead is as well reinforcing the cabin. in order to make better use of the space at the companionway area I...

companionway teak louvered doors customised, opening dashboard opening front windows stainless hardware details http://www.yacht.ro