three layers veneer impregnated in epoxy; first two layers diagonally; third layer horizontally;three coats epoxy on the outside. the framing was...
42 ft hull turned for cold molding
most framing , most floors and 70% planking were rebuilt in laminated ash epoxy capsulated; the hull was rolled on two massive wood wheels; in...
first we took the paint off the entire hull and deck. the hull structure is resorcinol one layer of 10mm cold molded mahogany over inner 9mm...
After +2000 NauticalMiles sailing passage from Italy Genova to Bucharest Romania ; the aging 40 ft Camper&Nicholson sloop ; the sea water...
our extra long spring passage sailing the Camper&Nicholson's 1963 sloop Rocquette Imperia/Italy to Constantza/Black Sea, 14 April - 18 June...
Composite bridge-deck cockpit sole,Diesel Steyr 212 hp epoxy&teak&mahogany laminated :front windows/ sliding lateral windows/louvered...
hull 20mm thick, up to keel/skeg 35 mm thick, cast bronze rudder &rudder shaft ; bronze keel shoe, Vetus bronze propeller; Vetus wet exhaust.
Designed and built Bucharest Romania 2003, Globalisation at work: boat was sold by means of internet advertising to Dutch Antilles. the...
Composite cruiser 27 test launching ;Giurgiu on Danube River.Photo taken secs before hitting water. Hull in polyester ; 50%vinylester and hand...
The 212 hp Steyr Turbo injection Diesel supported by okoume cored fiberglass framing, foam cored deck and cabin, mahogany&epoxy opening front...
Black Sea Cruiser 27 ; designed &built 2003 in Bucharest Romania composite/vinylester lobsterboat hull, 212 hp Steyr Diesel; Vetus...
