Boat builders wanted

RussSB

New Member
Joined
Jun 17, 2025
Posts
2
Reaction score
1
Location
Houston TX
We are building a cold molded prototype 33' powerboat in Houston. Need wood workers, west systems epoxy laminator and glassers, fairing and painting too. $20-$60/hour
 
Welcome to the Forum Russ.

This sounds like an interesting project - are you at liberty to tell us some more about the boat that you are building?
 
33' day boat style powerboat. Big main deck with 300hp outboard. But it isn't going to get done if I can't get help :)
 
Big main deck with 300hp outboard.

Is she just going to have a single 300 hp outboard motor, or will she have two?
A single 300 hp is not a lot for a 33' boat.
What is her designed service speed?
Have you got any drawings that you can post on here?
Alternatively, would you maybe like to start a new thread about your boat in the Boatbuilding section of this Forum?
Boatbuilding https://www.boatdesign.net/forums/boat-building/
 
Hi Russ, are you still looking for professionals for this project?
 
Hi Russ, are you still looking for professionals for this project?
Russ hasn't been on the Forum since his post above, two years ago...
 
Last edited:
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.

  • Back
    Top