Are the predicted lifespan and build quality of boats considered during design?

Discussion in 'Boat Design' started by rony2014, Sep 12, 2022.

  1. rony2014
    Joined: Sep 2022
    Posts: 1
    Likes: 0, Points: 1
    Location: INDIA

    rony2014 New Member

    Many sailors can only afford boats from the 1960s and 1980s, and I doubt that they were built with the intention of lasting for another 50 to 70 years. Throwing money around in buckets, or at least more than normal, will undoubtedly keep things moving, but eventually, it has to become prohibitive.
     
  2. fallguy
    Joined: Dec 2016
    Posts: 7,598
    Likes: 1,674, Points: 123, Legacy Rep: 10
    Location: usa

    fallguy Senior Member

    Boats are always about tradeoffs. Trading longevity for weight is one..
     
  3. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Wooden boats were not built to last 50 to 70 years either. In general, boats get neglected as they get old because the value decreases. At some point the value is less than the cost of maintenance or repair, so it is cheaper to buy another used boat.
     
    fallguy likes this.
  4. kapnD
    Joined: Jan 2003
    Posts: 1,298
    Likes: 412, Points: 83, Legacy Rep: 40
    Location: hawaii, usa

    kapnD Senior Member

    longevity predictions are not publicized, but certainly must be a part of any design process.
    Production boats need only hold up for their warranty period, while custom designs can be built with varying degrees of longevity in mind.
    You cannot generalize the question to encompass all boats, Do you have a specific boat in mind?
    Your best defense as a buyer is knowledge, and lacking that, you must rely on qualified surveyors.
     
  5. Rumars
    Joined: Mar 2013
    Posts: 1,791
    Likes: 1,107, Points: 113, Legacy Rep: 39
    Location: Germany

    Rumars Senior Member

    Yes they are, but it's seldom a first row problem for pleasure boats. The value of a boat it's not in the hull and deck but in the systems, and those have a pretty clear lifespan. There is also the issue of the original customer, most of them are not willing to pay for a lifetime they are not going to use, so the builders fit what is adequate, not the absolute best available.
    Then there are a lot of areas where the materials are considered obsolete for esthetic reasons instead of functional ones. Best examples are upholstery patterns and baby blue formica countertops.

    If a restauration is financially responsible has more to do with the individual condition the vessel is in, then with the original build quality.
     
  6. rxcomposite
    Joined: Jan 2005
    Posts: 2,752
    Likes: 608, Points: 113, Legacy Rep: 1110
    Location: Philippines

    rxcomposite Senior Member

    Yes it is and it is called Factor of Safety. It is the ratio of Ultimate stress to the Working stress. Working stress is a value chosen that when a load is applied, the structure will not yield/fail. To define a working stress, it must be a value that is below the yield point of the material of which generally is about 60% of the ultimate strength. Below means it is not the yield strength you are designing to but its limit you assign. The yield point is usually arrived at by testing and publishing the result.

    There are other factors that determines yield strength such as temperature, corrosion, purity of material, and accuracy of data, but let us not delve into that.

    So how does this relate to lifespan? If you keep stressing the material to its limit or near limit by several thousand cycles, it will fail due to fatigue. So for longevity, the working stress should be much, much less than the yield strength. A safety factor of 1 means it will definitely fail, 2 means you are below the 60% limit of most material, 3 means you are only using 1/3 of the ultimate strength of the material and way below the yield strength.
     

  7. ziper1221
    Joined: May 2018
    Posts: 44
    Likes: 5, Points: 8
    Location: florida

    ziper1221 Junior Member

    Older fiberglass boats were so overbuilt that fatigue failure of the hull is a non-concern. Of course there are the usual service components that need to be regularly taken care of like thru hulls, rigging, etc, but at that point is a question of what the used market can bear and not what the used item can bear.
     
Loading...
Similar Threads
  1. darr
    Replies:
    11
    Views:
    7,263
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.