Building 17' wide 14' long deck

Discussion in 'Multihulls' started by DamianW86, Jan 7, 2022.

  1. SolGato
    Joined: May 2019
    Posts: 377
    Likes: 235, Points: 43
    Location: Kauai

    SolGato Senior Member

    I have to agree with some of the others about this possibly being too ambitious of a project to use the Mac for as a foundation, especially if you intend to use it offshore.

    Regardless of how much you build out above deck, I think it would be wise to at least lash the deck atop the front and rear cross beams.

    Did you get a look at the Conser Warrior that has been passed around islands? It had a center pod with two additional beams that connected the front and rear cross beams that triangulated everything. I think something like that to help keep the boat from twisting that you then set your hard deck on top of and attach to would take some stress off a lightweight hard deck.

    The main reason I passed on that Mac is because the hulls really don’t have enough freeboard and volume (especially at the stern) to support a lot of extra weight. I’ve seen a few of them and a few Stiletto conversions with hard decks that squat in the water due to the excessive weight.

    I don’t know what your reason is for the cabin, but if it’s just to get out of rain and sun and to be able to camp, have you considered instead building a hard deck and a hard Bimini and then creating a shower curtain like full canvas enclosure hung from the Bimini? That’s what I have done and will do with my bigger solar electric build in order to help keep the boat light.
     
  2. SolGato
    Joined: May 2019
    Posts: 377
    Likes: 235, Points: 43
    Location: Kauai

    SolGato Senior Member

    Aloha. Have you mad any progress on your project?

    I think you mentioned in an earlier post that you had sourced some new aluminum cross tubes to increase the beam width.

    Is there a supplier here in the islands, or did you have them shipped from the Mainland?

    Thanks!
     

  3. redreuben
    Joined: Jan 2009
    Posts: 1,999
    Likes: 223, Points: 63, Legacy Rep: 349
    Location: South Lake Western Australia

    redreuben redreuben

    Damian, to build a deck between the hulls and put a cabin on it without support from the crossbeams is a no unless you incorporate stiffeners at least the size of the crossbeams.
    And even that will have issues if there is no bury into the hulls.
    Without support from the crossbeams fore and aft stiffeners will be next to useless.
    What you will end up with is a hard trampoline.
     
    guzzis3 likes this.
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.