Reasonable efficiency estimate for a pedal drive

Discussion in 'Boat Design' started by kerosene, Nov 19, 2021.


  1. Andrew Kirk
    Joined: Jul 2021
    Posts: 97
    Likes: 68, Points: 18
    Location: Chorley UK

    Andrew Kirk Pedal boater.

    My dinghy is pedalled from a recumbent position. The difference between the boat and my mountain bikes is that the boat requires a constant application of effort since on the canal there are no hills! The terrain forces the mountain biker to adjust his effort constantly. The big thing I've changed on my boat is the gearing, to get the right cadence. I certainly only need one gear but the pedalling rate needs to be right. At first I was only achieving around 30 rpm and it was hardly making me breathe but killing my leg muscles. I fitted a chain and sprockets to double the cadence and things are much better.
    Power is given by torque multiplied by frequency so now, at twice the cadence, I only need half the turning force and my legs are doing fine. I can now spin the pedals at up to 70 rpm which is probably still a little low. My speed has increased a little at a better cadence.
    So whatever your pedal powered propulsion system you need to get your gearing correct for speed and stamina. I've written quite a lot of posts about it in my blog.
    https://mountainbiker.online/2021/10/26/cross-training/
     
    Last edited: Dec 1, 2021
    DogCavalry likes this.
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.