Series production boatbuilding

Discussion in 'Boatbuilding' started by VIKING, Jun 27, 2003.

  1. VIKING
    Joined: Jun 2003
    Posts: 17
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: South Africa

    VIKING Junior Member

    HI,

    I HAVE A SMALL BOATBUILDING BUSINESS PRODUCING ONE 33 FT POWERBOAT A MONTH. I WOULD LIKE TO INCREASE PRODUCTION TO 3 PER MONTH AND THEN LATER TO 5 PER MONTH. MY FLOOR SPACE IS 660 SQUARE METERS. (STORES ARE EXCLUDED- NEXT DOOR)
    I HAVE VERY BASIC FACILITIES AND WOULD LIKE TO KEEP IT THAT WAY AS THE BOATS ARE SIMPLE SOLID GRP (CSM) CONSTRUCTION.

    I AM PRESENTLY BUILDING ONE A MONTH WITH 2 SKILLED LAMINATORS (ONE IS ALSO A SKILLED CARPENTER). I ALSO HAVE ANOTHER 2 SEMI SKILLED LAMINATORS WHO HELP.

    I WOULD APPRECIATE ADVICE ON HOW TRIPLING MY PRODUCTION WILL EFFECT WHAT RESOURCES I WILL NEED . ALSO ANY RELEVANT TIPS WOULD BE MUCH APPRECIATED.

    I ASSUME I WILL NEED TO GET A PRODUCTION LINE GOING WITH TEAMS AT EACH STATION? (SOUNDS LIKE A LOT MORE LABOUR IS NEEDED!

    I ALSO ASSUME IT WILL NOW BE NECESSARY TO DOCUMENT ALL PROCESSES TO ENSURE PROPER QUALITY. (I PREVIOUSLY COME FROM A CUSTOM BOAT BUILDING YARD SO DO NOT HAVE EXPERIENCE OF PRODUCTION LINE WORK).
     
  2. Timm
    Joined: Aug 2002
    Posts: 107
    Likes: 2, Points: 0, Legacy Rep: 64
    Location: Crystal River, FL USA

    Timm Senior Member

    One of the most important things you can do is come up with an accurate Bill of Materials. Find out how much of each and every part on the boat you use. Make sure this is accessible and easy to update as prices and part numbers change. Try to also get a good handle on the consumables, ie... rags, sandpaper, acetone, etc.. You will be amazed at how much of that stuff you go through.

    I am not familiar with your environmental laws or worker safety laws, but I'd also check to make sure increasing your production doesn't reclassify you as far as the guvmint is concerned. Here we have to file more forms and meet higher safety requirements as the company grows.

    Also take a hard look at your finances. As you put more boats in production, you will find your inventory needs increase substantially due to having more boats in process. I think a number of growing builders have failed to grasp just how much money is sitting in their palnt at one time.

    Lastly, try to make sure your tooling and design is up to the increased production. Try to design any extra labor out of the process. If a mold has a flaw that you repair on every part, it may not be a big deal at one a month, but at 4 or 5 month it could be very costly. I have worked for companies that devoted one stop on their production lines to patch and repair parts. I never agreed with this philosophy as it tends to "create" repairs as the lamination crew knows there is someone to cover their buts when they screw up. Not a whole lot of incentive to get it right the first time.

    I hope this helps! I have worked for companies building up to 50 boats a week and things could get very complicated, very fast.
     
  3. JORGE LANG
    Joined: Jan 2002
    Posts: 21
    Likes: 1, Points: 0, Legacy Rep: 60
    Location: FORT LAUDERDALE

    JORGE LANG Junior Member

    Out of curiosity, what type of engines are going into these boats?
     
  4. VIKING
    Joined: Jun 2003
    Posts: 17
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: South Africa

    VIKING Junior Member

    Hi Jorge,

    These boats all have outboard motors (Generally 115Hp - 150 Hp Yamaha as the company is also a Yamaha agent).
     
  5. VIKING
    Joined: Jun 2003
    Posts: 17
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: South Africa

    VIKING Junior Member

    Hi Tim,

    Our moulds are shocking so this is a major issue. We will have to work on all of them. Some are very 'crinkly' too so not sure how to sort that out!

    Re Govt regs here, they're very slack so not an issue- although workers and environ must be adressed of course.

    Some good pointers thanks - I'm glad you confirm what I was thinking.
     
  6. War Whoop
    Joined: Jun 2003
    Posts: 661
    Likes: 16, Points: 0, Legacy Rep: 84
    Location: Sunny Ft Lauderdale Fla

    War Whoop Senior Member

    The easiest way to ramp up is just to add another line complete with Molds. And personal.
     
  7. Leego
    Joined: Feb 2004
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Pretoria South Africa

    Leego New Member

    Question

    Hi there Viking

    My husband and myself is interested in building our own boat for personal use. No commercial etc. involved. We, however, want to obtain the plans etc. for a Waverunner 65B [Steel]. Do you possibly know where we can purchase this plans in South Africa?

    Thank you

    Kind regards
     
  8. CDBarry
    Joined: Nov 2002
    Posts: 824
    Likes: 57, Points: 28, Legacy Rep: 354
    Location: Maryland

    CDBarry Senior Member

    Start out by looking at standard manufacturing texts to get some ideas:

    "Reinventing the Factory", anything by Deming, Juran, etc., tuff on "Toyota Production System", "Lean", "5S", "Just In Time", and so on.
     

  9. Leego
    Joined: Feb 2004
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Pretoria South Africa

    Leego New Member

    Thank you CDBarry, I will look into it.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.