Levi Dart 38

Discussion in 'Boat Design' started by Flysafe, Sep 25, 2020.

  1. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Steering wheel was completed and with color, I needed to make a few changes, It is time to draw the seat. A render. Dart 38  063.jpg
     
  2. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Engine hatch.

    Dart 38  066.jpg Dart 38  070.jpg
     
  3. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    "U" bolt and deck rail, I am working in the cleat. Initially I made the rail deck holders thinner, after I looked at a few moments it has needed changing them for thick ones.

    Dart 38  073.jpg

    Dart 38  075.jpg

    Dart 38  076.jpg
     
  4. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    I have all the cleats done.
    Next will the navigation light, and the round hatch that exist between the fuel hatch and the forward central cleat.
    Meanwhile the drawing grows in drawn parts and in file size. Dart 38  080.jpg Dart 38  082.jpg

    This one it's just for fun environment Map on.
    Dart 38  083.jpg Dart 38  085.jpg
     
  5. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    The round hatch is made as well as the sticker is in place.

    Dart 38  086.jpg
     
    Earl Boebert likes this.
  6. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Today was the day to put all the vents in place, when I made the cut of the deck the stain in the hatchs no longer exists.

    Dart 38  091.jpg
     
  7. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Rudder and rudder hardware.

    Dart 38  093.jpg

    Dart 38  092.jpg
     
    Earl Boebert likes this.
  8. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Small details.

    Dart 38  098.jpg
     
  9. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Trim tab, the buttons on the steering wheel are for this.

    Dart 38  0102.jpg
     
  10. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    I'm trying to draw a surface propeller, I do not want anything too technical. What I'm looking for is the length of the hub and the outside diameter, for a 5-blade propeller with 18 inch diameter. Someone can help me with this information or guide me where I can consult this type of information.
    My first attempt still needs a lot of work.
    upload_2020-12-27_14-36-7.png

    All the best.
     
  11. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Propeller LH and RH done.

    Dart 38  0106.jpg Dart 38  0107.jpg Dart 38  0108.jpg
     
  12. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Working in the propeller shaft support brackets.

    Dart 38  0113.jpg
     
  13. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Propeller shaft support brackets completed.

    Dart 38  0119.jpg
     
  14. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    Reduce the model I’ve made and start making the frames. The frame party will start.

    Dart 38  0125.jpg
     

  15. Flysafe
    Joined: Oct 2009
    Posts: 63
    Likes: 6, Points: 8, Legacy Rep: 11
    Location: Lisbon/Portugal

    Flysafe Junior Member

    I've been busy, the drawing now goes a little slower.
    Study the position of the frames and fuel tank supports, as well as the ballast. Dart 38  0126.jpg
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.