Free Standing Aluminum Mast, Mounting Hardware

Discussion in 'Sailboats' started by montgwh, Apr 19, 2016.

  1. montgwh
    Joined: Apr 2016
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: South Alabama

    montgwh New Member

    I'm currently working on installing a sail bag system on a Freedom 40 that has the original unstayed aluminum masts. The design of the bag normally requires hardware to be attached to the mast, however because of the free-standing design, I'm very hesitant to drill holes in the mast. Should I be concerned that it would cause damage, or is the mast "beefy" enough. I tried to contact Eric Sponberg, but apparently he has retired and gone sailing, dang. hahaha, sounds nice. Can anyone give me a definitive answer or point me to a Naval Architect with experience in this area? Any help would be greatly appreciated. Thank you.
     
  2. rob denney
    Joined: Feb 2005
    Posts: 890
    Likes: 285, Points: 63, Legacy Rep: 436
    Location: Australia

    rob denney Senior Member

    Almost certainly the mast is strong enough to stand a few rivet holes. If possible, try to keep them as far away from the deck bearing as possible, not radially around the mast and on the leading and trailling edges rather than the sides
     
  3. phillysailor
    Joined: Nov 2012
    Posts: 21
    Likes: 2, Points: 3, Legacy Rep: 10
    Location: Media, PA

    phillysailor Junior Member

    I was reluctant to drill my CF tubes, so ground and sanded a G10 puck in which embedded nuts secured the hardware I was attaching. I glued it to the mast with epoxy and laid FG on top, in a couple of orientations. I mixed carbon powder into the epoxy so that the color matched the mast, although it is matte instead of glossy.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.