1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

25 Panga mold (sold)

Discussion in 'Boat Molds' started by 25panga, Apr 26, 2019.

Thread Status:
Not open for further replies.
  1. 25panga
    Joined: Apr 2019
    Posts: 0
    Likes: 0, Points: 0
    Location: Virginia

    25panga New Member

    PANGA 25
    LOA: 25’
    BEAM: 7’
    DRAFT: 10”
    HULL WEIGHT (DRY): 1800LBS
    MAX HP: 175
    FUEL CAPACITY (GAL): 50
    CARRYING CAPACITY: 7 PEOPLE

    This hull features a full gunnel cap with anchor hatch. The full transom and full wraparound gunnel cap allows for bracket mounted engine configurations, or an insert can be used in the cap to build a transom mount engine configuration, as shown in the pictures below. An insert can also be used to make this hull in a 22' configuration.

    Pangas are extremely efficient and this hull can be powered with a 90hp and still easily plane and reach a top speed of 35mph. Powered with a 150hp, top speed will be in the low 40s

    2.jpg 3.jpg 4.jpg 8.jpg IMG_0015.JPG IMG_0017.JPG IMG_0014.JPG IMG_0001.JPG pulled 1.jpg IMG_0005.JPG IMG_0020.JPG gelcoat mold.jpg

    The mold was built in 2017 and is fully cored and braced extensively with plywood. Only 3 hulls pulled. A semi perm mold release system is used and the molds are ready to pull parts. Molds are located in Virginia. Both the mold and cap can fit in a shipping container for domestic or international shipping.
     
  2. bob davis
    Joined: Oct 2019
    Posts: 0
    Likes: 0, Points: 0
    Location: miami

    bob davis New Member

    offer $ 10000 for the mold
     
  3. Chandler lynch
    Joined: Sep 2020
    Posts: 0
    Likes: 0, Points: 0
    Location: Madison ct

    Chandler lynch New Member

    Is this mold still available? Nice looking boat.
     
  4. 25panga
    Joined: Apr 2019
    Posts: 0
    Likes: 0, Points: 0
    Location: Virginia

    25panga New Member

    Yes this mold is still available.

    Thanks,
    Alex

    25pangamold@gmail.com
     

  5. Ace Aseltine
    Joined: May 2021
    Posts: 0
    Likes: 0, Points: 0
    Location: San Clemente Ca

    Ace Aseltine New Member

    Is this mold still available? Very interested in shipping one to Southern California.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.
Thread Status:
Not open for further replies.