Zebra madness

Discussion in 'All Things Boats & Boating' started by kach22i, Apr 19, 2006.

  1. kach22i
    Joined: Feb 2005
    Posts: 2,418
    Likes: 111, Points: 63, Legacy Rep: 1222
    Location: Michigan

    kach22i Architect

    It was the program that came free with my camera, gets the point across though.

    Here is an old sketch I did, lower the roof, hood scoop, some NOS or a blower and I have a Hot Rod.:D

    [​IMG]
     
  2. Figgy
    Joined: Feb 2006
    Posts: 315
    Likes: 12, Points: 18, Legacy Rep: 88
    Location: TN

    Figgy Senior Member

  3. Figgy
    Joined: Feb 2006
    Posts: 315
    Likes: 12, Points: 18, Legacy Rep: 88
    Location: TN

    Figgy Senior Member

    Don't forget the exhaust!
     
  4. Wellydeckhand

    Wellydeckhand Previous Member

    The exhaust can be stainless.......... just copy the dimension and weld but need to know about the chamber inside................:)
     
  5. Wellydeckhand

    Wellydeckhand Previous Member

    Add on for tough look

    I think a Bull Bar might make it look tough............. in my town it cost Rp. 1.500.000 mean US$ 150,. for the front piece............ Nice and strong :)
     

    Attached Files:

  6. Bergalia
    Joined: Aug 2005
    Posts: 2,517
    Likes: 40, Points: 0, Legacy Rep: 254
    Location: NSW Australia

    Bergalia Senior Member

    Reminds me of the tale of the elderly Scots tramp who turned up at an English gent's newly acquired Highland estate asking if there were any odd jobs he could do for a hot meal. The English gent considered for a while then produced a pot of bright pink paint and said - "Yes, old chap.Take this and recoat the porch at the back of the house...."
    An hour later the tramp banged on the door. "All done sir. And by the way, it's not a Porche, it's a Mercedes.......":)
     
  7. kach22i
    Joined: Feb 2005
    Posts: 2,418
    Likes: 111, Points: 63, Legacy Rep: 1222
    Location: Michigan

    kach22i Architect

    I'll post this in a Porsche forum I post at, they will love it.:D
     
  8. waikikin
    Joined: Jan 2006
    Posts: 2,440
    Likes: 179, Points: 73, Legacy Rep: 871
    Location: Australia

    waikikin Senior Member

    Kach, I love wot you've acheived, I bin wantin' to do that to a car for YEARS, we call them stipes "DAKTARI" stripes after a TV show of that name that had bootiful stripes on their cars just like yours, excellent effort, well done!!! ; ).Regards from Jeff.
     

  9. kach22i
    Joined: Feb 2005
    Posts: 2,418
    Likes: 111, Points: 63, Legacy Rep: 1222
    Location: Michigan

    kach22i Architect

    Thanks, I need the kind words because everytime I get in the car a little something snaps off, buzzes or stops working.

    The latest thing is the sun visor.

    That's right the drivers side sun visor will not stay up - blocks my view. The fix; thinking butterfly bolt and sheet metal screw, because adhesive backing on velco will melt in the sun. I've learned a few things keeping this beast on the road over the years.

    The heat shield on at catalitic converter is buzzing again. Most likely worked lose because I need engine mounts or transmission mounts.

    I only put about 2,500 miles a year on this car - gosh darn it I'm going to have fun with it - not going to let it die.;)
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.