5083 or 6082t6 for catamaran beam?

Discussion in 'Metal Boat Building' started by resynth, Jul 15, 2019.

?

is it worth paying extra for 5083 alu over 6082t6 for a painted catamaran beam?

  1. 6082t6

    1 vote(s)
    100.0%
  2. 5083 (more expensive!)

    0 vote(s)
    0.0%
  1. resynth
    Joined: Apr 2009
    Posts: 21
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: scotland

    resynth Junior Member

    I'm replacing a soggy wooden beam on my 10 metre cruising cat and have opted for aluminium tube (substantially cheaper than mast section).
    Most suppliers only sell 6082t6 grade but my understanding is 5083 has significantly better corrosion resistance?
    I have found one supplier who can sell me 5083 tubing but it's nearly twice the price. If I need the 5083 that is fine but I'd rather not pay double if the 6082 will do a satisfactory job.
    So my question is - would painted 6082t6 aluminium be considered reliable/long lasting in the service of a beam on an ocean cruising cat or should I pay the extra for the 5083?

    Cheers
    Ben
     
  2. Ad Hoc
    Joined: Oct 2008
    Posts: 7,774
    Likes: 1,679, Points: 113, Legacy Rep: 2488
    Location: Japan

    Ad Hoc Naval Architect

    Hi Ben,

    If you are replacing a beam on a multihull - catamaran - then the issue should be strength and deflection driven.
    Then you address any possible corrosion issues.

    Both are good for use as beams, but, like with anything in design - depends upon the final details.

    First and foremost, get the strength and the deflection, in terms of scantlings you need.
     
  3. resynth
    Joined: Apr 2009
    Posts: 21
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: scotland

    resynth Junior Member

    Hi Adhoc,

    I'm quite happy about the strength and scantlings, the corrosion issues are what I am unsure about.

    Cheers
    Ben
     
  4. Ad Hoc
    Joined: Oct 2008
    Posts: 7,774
    Likes: 1,679, Points: 113, Legacy Rep: 2488
    Location: Japan

    Ad Hoc Naval Architect

    Ben
    So long as you take measures to prevent any galvanic corrosion, you should be ok.
    Thus be mindful of any dissimilar metals it is attached to or in close proximity and how the beams are attached and fixed to the main hulls.
    I regularly use 6000 series for structure that connects the 2 hulls of catamarans.
     
  5. resynth
    Joined: Apr 2009
    Posts: 21
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: scotland

    resynth Junior Member

    Great, thanks Ad Hoc. I figured that as mast seem to be made of 6000 series but wanted to make sure!
    I'll be bonding it in with G-flex and will bond the seagull striker on also. Should be no holes and no metals.
    Ben
     
  6. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Are you getting anodized tube?
     
  7. goodwilltoall
    Joined: Jul 2010
    Posts: 844
    Likes: 26, Points: 28, Legacy Rep: 31
    Location: nation of Ohio

    goodwilltoall Senior Member

    Ive had problems with epoxy to aluminum
     
  8. resynth
    Joined: Apr 2009
    Posts: 21
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: scotland

    resynth Junior Member

    I can't find anyone who sells anodised in the size I want. Also I read somewhere that epoxy doesn't work as well with anodised. I'm going to etch prime, paint and try and keep the inside sealed.

    Goodwilltoall - There are already instances of aluminium epoxied to my boat that have been there for 22 years, still holding strong so fingers crossed!
     
  9. Ad Hoc
    Joined: Oct 2008
    Posts: 7,774
    Likes: 1,679, Points: 113, Legacy Rep: 2488
    Location: Japan

    Ad Hoc Naval Architect

    Not necessary.
    So long as you pay attention to the connections/joints and anything that penetrates the structure and take measures to mitigate any possible galvanic action - you'll be ok.
    We never use anodised ally for our cross deck structures...
     
    resynth likes this.
  10. trip the light fandango
    Joined: Apr 2018
    Posts: 505
    Likes: 104, Points: 43
    Location: Rhyll Phillip Island Victoria Australia

    trip the light fandango Senior Member

    I just looked up G flex ,it sounds great, but when you say your going to glue the new beam on, do you mean into a housing/ bed with brackets, because what surface material is on the other side of the epoxy join that can manage flex and load? I get it with the post for the striker I think, also there won't be any paint in between the epoxy and the joins I'd imagine. I'm just curious, regards
     
  11. resynth
    Joined: Apr 2009
    Posts: 21
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: scotland

    resynth Junior Member

    Fandango - I've chopped the deck off and a bit of the inner topsides. There are 2 bulkheads at the bow with a shelf between them. The beam will be bonded to the shelf and strapped down with uni-directional running down the bulkheads. Repair deck and hull, nice fat fillet where beam enters, paint beam, hopefully job's a good 'un!
     

  12. trip the light fandango
    Joined: Apr 2018
    Posts: 505
    Likes: 104, Points: 43
    Location: Rhyll Phillip Island Victoria Australia

    trip the light fandango Senior Member

    That sounds good, I've been following types of aluminium and suitability for welding, 6061 loses tensile strength if it's welded,.. I think. so the glue is interesting, good luck with the project.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.