How to bond a cockpit liner to hull sides

Discussion in 'Fiberglass and Composite Boat Building' started by nickireson, Mar 25, 2019.

  1. nickireson
    Joined: Jan 2011
    Posts: 20
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Tampa

    nickireson Junior Member

    I'm currently designing a boat that will have a "cockpit liner" (I dobt inow if this is the proper term) but basically the deck and inner gunnel walls are in one piece. The tolerance between the hull sides and the liner is going to be about 5/8" to 3/4". What is the best way to bond the sides on these 2 pieces? Do I make a ledge/dam and pour foam? Or should I core the sides of the liner to make the tolerance smaller and use bonding putty? Is there another alternative? Thanks! Attached are ours of a stick built version of the hull, and a mold for a liner similar to what I'm talking about, in an effort to explain.
     

    Attached Files:

  2. ondarvr
    Joined: Dec 2005
    Posts: 2,929
    Likes: 573, Points: 113, Legacy Rep: 506
    Location: Monroe WA

    ondarvr Senior Member

    Most don’t bond those areas, it’s bonded to the hull bottom (stringers), then again at the gunnels.

    Foam can expand more than desired in some areas and warp the hull and/or liner.

    Putty can shrink and do the same thing, especially in that size of a gap.
     
    trekker likes this.
  3. nickireson
    Joined: Jan 2011
    Posts: 20
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Tampa

    nickireson Junior Member

    Yes those were my concerns. I really don't want any rattle, and I want to achieve that same solid feel of a stick built vessel...
     
  4. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member


  5. rwatson
    Joined: Aug 2007
    Posts: 6,163
    Likes: 495, Points: 83, Legacy Rep: 1749
    Location: Tasmania,Australia

    rwatson Senior Member

    You may like to experiment with PolyStyrene granules.

    If you get a bag of "beans", the sort that you put into "Bean Bags", reports are that surprisingly, they mix very readily with epoxy.

    The resultant lightweight, but quite incompressible mix would not expand or contract, but might serve as a great filler for the gap between liner and hull.

    Might be worth a test.
     
Loading...
Similar Threads
  1. BernieJ
    Replies:
    13
    Views:
    1,279
  2. itchyglass
    Replies:
    22
    Views:
    3,010
  3. Florida Boat Guy
    Replies:
    15
    Views:
    2,093
  4. Midday Gun
    Replies:
    8
    Views:
    2,106
  5. Mark C. Schreiter
    Replies:
    12
    Views:
    1,918
  6. aaronhl
    Replies:
    6
    Views:
    2,007
  7. fallguy
    Replies:
    12
    Views:
    1,609
  8. fallguy
    Replies:
    2
    Views:
    1,047
  9. DogCavalry
    Replies:
    11
    Views:
    1,685
  10. Bullshipper
    Replies:
    3
    Views:
    3,542
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.