Why are submarines poor sailers?

Discussion in 'Boat Design' started by misanthropicexplore, Jul 30, 2018.

  1. waikikin
    Joined: Jan 2006
    Posts: 2,440
    Likes: 179, Points: 73, Legacy Rep: 871
    Location: Australia

    waikikin Senior Member

    So if they were designed and optimised for sail propulsion on the basis of the use of a motion control system they could be "good" sailers rather than poor. Not sure what the attraction would be to pursue such investment unless there was some tactical military prerogative in a changed future..... but we've all seen the work of fiction become truth just look at Dick Tracy and his wrist communications.. upload_2018-9-28_13-52-35.png
    Jeff.
     
  2. upchurchmr
    Joined: Feb 2011
    Posts: 3,287
    Likes: 259, Points: 83, Legacy Rep: 579
    Location: Ft. Worth, Tx, USA

    upchurchmr Senior Member

    Go ahead and show us.
    All this talking makes me tired.
     
  3. High spirit
    Joined: Aug 2018
    Posts: 6
    Likes: 1, Points: 3
    Location: Netherlands

    High spirit Junior Member

    Bear with me upchurchmr,
    it is more difficult to be original than to be critical.
    We are getting good suggestions here.
     
  4. High spirit
    Joined: Aug 2018
    Posts: 6
    Likes: 1, Points: 3
    Location: Netherlands

    High spirit Junior Member

    Hi Jeff,
    Thanks for your observation.
    You hit the nail on the head.
    One reason why I am exploring the idea of a submerged hull is exactly that.

    One can off course design a fully foiling ship such as the Ketterman / Hobie TriFoiler or the America Cup AC45.
    However, 100% foiling in ocean conditions is not very wise in rough sea's.
    Now the effect of submerged buoyancy looks a bit like foiling (in that it takes the wave resistance out for the majority of the weight of the ship).
    Hence combination of submerged hull + foiling could have the best of both worlds - the seaworthiness of a submarine and the speed of foils.
    Especially in off-design conditions (low speed) where foils will not provide appreciable lift, the buoyancy will ensure seaworthiness.

    In effect such a sail boat would operate like a SHARK / MARLIN / DOLPHIN- remember that the fins of all fast swimming fish / marine mammals are designed to provide enough hydrodynamic lift to keep them upright and have a neutrally buoyant hull.
     
  5. upchurchmr
    Joined: Feb 2011
    Posts: 3,287
    Likes: 259, Points: 83, Legacy Rep: 579
    Location: Ft. Worth, Tx, USA

    upchurchmr Senior Member

    No you are getting cartoon suggestions.
    Nothing here addresses the complete set of issues.
    This is just like playing a video game - no reality at all.
    Just because you want to imagine something doesn't mean it will ever work.

    You certainly are right - originality is much more difficult. But you have to know something to preceed to something original.

    Never mind, I won't be following any more.

    Marc
     
  6. waikikin
    Joined: Jan 2006
    Posts: 2,440
    Likes: 179, Points: 73, Legacy Rep: 871
    Location: Australia

    waikikin Senior Member

    So is the attraction a speed record?
    Other than just for the sake of it/speed record/unknown military requirement it would be an incredibly complex machine to generally operate and navigate... is the plan to operate at snort/low depth with periscope /radar mounted to rigging or deeper via kite with sonar & ?
    J.
     
  7. BlueBell
    Joined: May 2017
    Posts: 2,684
    Likes: 959, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    High Spirit,
    Good for you to think outside the box.
    I've seen a craft as you describe/dream.
    Some university kids built an 80 cm model and it sailed!
    I have a poor picture of it somewhere.
    Can't post photos here so Personal Message me your email and I'll send you a copy... if I can find it.
    Cheers
     
  8. jehardiman
    Joined: Aug 2004
    Posts: 3,762
    Likes: 1,152, Points: 113, Legacy Rep: 2040
    Location: Port Orchard, Washington, USA

    jehardiman Senior Member

    No, they would be poorer sailers because the drag of the control surfaces when displaced to provide righting moment offsets any advantage a SWATH would have over a common narrow hulled displacement cat. What you really need to make a "good" sailing vessel is minimum wetted surface for the displacement and stability required for the power of the rig. If you really want to use dynamics for righting moment you either move a large percent of the vessels weight (canting keels, pry boards, traps, etc) or you use lifting foils to reduce wetted surface while providing the necessary stability moment (i.e. the AC foiling cats).
     

  9. jehardiman
    Joined: Aug 2004
    Posts: 3,762
    Likes: 1,152, Points: 113, Legacy Rep: 2040
    Location: Port Orchard, Washington, USA

    jehardiman Senior Member

    Just so you know, sharks, marlin, and porpoise shapes are fairly inefficient as unpowered (i.e. sailing) hull forms. The body shapes (and they are all 3 very different) they are designed to create specific types of active propulsion drag, not reduced drag when being driven by a sail. Not only that, but the shapes are dependent on the physiological requirements of the specific animal (i.e. the shark is a lifting body because it lack positive buoyancy, the marlin is too thin because it needs heat dissipation, the porpoise is too fat because of heat retention).

    Really, if you want the "sailing" speed record, the hull form that I think is poised to break 100 knots sailing speed was proposed back in the 1970's but is now possible due to modern materials and controls. This is a fully suspended mono-depressor hull pod utilizing a kite sail for lift and power. Only money and the will to see it through is stopping that today.
     
    JamesG123 likes this.
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.