Procedure for the selection of the propeller

Discussion in 'Hydrodynamics and Aerodynamics' started by Surfer Naval Architect, Apr 27, 2018.

  1. Surfer Naval Architect
    Joined: Feb 2018
    Posts: 46
    Likes: 1, Points: 8
    Location: Amsterdam, The Netherlands

    Surfer Naval Architect Naval Architect

    Dear all,

    I would like to ask you if you can help me to understand more about the design procedure for the selection of the propeller, including the cavitation.

    I am a naval architect and I have my books where I can take a look, but I would like to extend my knowledge about this argument which I think is not one of the easiest.

    So if you can send me some good pdfs, or links where I can read more about this subject I will much appreciate it.

    Also just sharing your experience would already be a great thing, because I have no practical experience with it.

    Many thanks and regards,

    RF
     
    Last edited: Apr 27, 2018
  2. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    The first parameter, which drives all the rest, is the maximum target speed. Based on that, you get the power necessary. The propeller needs to be able to absorb the power, so that will determine blade area. This is also affected by shaft RPM and slip, which determine pitch. You can look at an ideal propeller first, and then see if it fits in the space available. If it doesn't, you need to compromise on one or more parameters.
     
  3. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Do you have it clear, Raffaele ?. Okay, you can now start calculating.
     
    Last edited: Apr 29, 2018
  4. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    =============================
    The event here has already occurred but you could contact the school for upcoming events and to get more information:
    “Propeller School” | Victoria, BC http://hydrocompinc.com/events/propeller-school_mari-tech

    Mr. MacPherson, the technical director of the School, is a member here-you can contact him directly:
    DMacPherson https://www.boatdesign.net/members/dmacpherson.8394/
     

  5. jehardiman
    Joined: Aug 2004
    Posts: 3,762
    Likes: 1,152, Points: 113, Legacy Rep: 2040
    Location: Port Orchard, Washington, USA

    jehardiman Senior Member

    This seems like a homework problem. When I presented my senior design study at University of Michigan, the was another study, They were designing a commuter ferry. They knew the drafts of their ports. They used the UofM propeller selection program. Professor Woodward let them get to the end, before he asked them how they could get into a 6 foot draft berth with a 8 foot diameter propeller....FIRST THING IS TO SELECT PROPELLER DIAMEMETER, everything else falls out from there.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.