1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

Revolution F1/F2 Tunnel Race Boat Molds For Sale

Discussion in 'Boat Molds' started by Screaming Eagle, Feb 1, 2018.

  1. Screaming Eagle
    Joined: Jan 2017
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ohio

    Screaming Eagle New Member

    NOTE: THE BLACK DECK IN THE PICTURES IS NOT AVAILABLE IN THIS AUCTION. IT HAS BEEN SOLD. THANK YOU

    These are the Original Revolution/Evolution F1 and F2 boat molds. The molds are in very good shape and ready to build from. All for the low price of $18,000!!!

    You will see in the last picture, the building they are stored in. These molds have NOT been stored outside.

    Here is a list of inventory you will receive.

    1. 1 Revolution hull/ bottom. We took a wrecked bottom and started to make a new design.

    2. 1 steel jig with upright post ever 16” for building boats on. This is what the wrecked bottom is attached to.

    3. 1 original Revolution green deck mold.

    4. 1 black deck mold second mold for the Revolutions.

    5. 1 red bottom hull mold original Revolution.

    6. 1 canopy mold (has wider view. Uses one Lexan piece for the windshield.)

    7. 1 canopy mold (has narrow view with extra supports. Uses 3 Lexan pieces for the windshield.)

    8. 1 mold for heating and bending Lexan on.

    9. 1 rear cowling mold top piece (black.)

    10. 1 rear cowling mold bottom piece (black.)

    11. 1 rear cowling jig for final fitting.

    12. 2 sets nose tip molds

    13. 3 sets (total 6) pickle forks/ sponson tip molds.

    14. Several deck access plate molds.

    15. Capsule nose area access plate mold.

    16. Vent molds.

    17. All the patterns for the boats ribs, transom and cross braces.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.