Problem with Slender Body mesh in Maxsurf

Discussion in 'Software' started by Zygan, Dec 30, 2017.

  1. Zygan
    Joined: Dec 2017
    Posts: 13
    Likes: 0, Points: 1
    Location: madrid

    Zygan Junior Member

    Currently trying to evaluate the resistence and power prediction of a multihull using Maxsurf Resistance. Since the length to beam ratio is more than the usual 6-7, I thought of using the slender body method. When I display the default mesh (which usually is more than enough) it doesn't look like anything I would expect. Any tips on the reason to this disaster?
     

    Attached Files:

  2. Zygan
    Joined: Dec 2017
    Posts: 13
    Likes: 0, Points: 1
    Location: madrid

    Zygan Junior Member

    Managed to partially solve the problem. Now, the thing is that the slender body mesh doesn't mirror on the second demihull. Any way to solve this?
     

    Attached Files:

  3. Zygan
    Joined: Dec 2017
    Posts: 13
    Likes: 0, Points: 1
    Location: madrid

    Zygan Junior Member

    attached the .msd file as requested.
     

    Attached Files:

  4. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    This is the SB Mesh I get after deleting symmetrical surfaces. The mesh looks correct.
    Attached new file .msd SB Mesh.jpg
     

    Attached Files:

  5. Zygan
    Joined: Dec 2017
    Posts: 13
    Likes: 0, Points: 1
    Location: madrid

    Zygan Junior Member

    Wow, much appreciated. Thank you very much.

    Sorry but I'm a beginner. What do you mean by deleting symmetrical surfaces? What should I do to avoid this? It's so that I don't get the same problem in the future.
     
  6. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Hope this help
    Snap2.jpg

    Always try to make the model as simple as possible.
     
  7. Zygan
    Joined: Dec 2017
    Posts: 13
    Likes: 0, Points: 1
    Location: madrid

    Zygan Junior Member

    So helpful, really really useful. Thank you so much. Hope I don't have to bother you again.
     
  8. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    You're welcome. At your disposal for what you need, if it is in my hands. I'll be happy to help you. PM if you need a more confidential conversation.
     
  9. Zygan
    Joined: Dec 2017
    Posts: 13
    Likes: 0, Points: 1
    Location: madrid

    Zygan Junior Member

    Thank you, you've been most helpful, I'll PM if necessary.
     
  10. Sri Hartanto Aji Sasongko
    Joined: Jul 2018
    Posts: 4
    Likes: 0, Points: 1
    Location: Indonesia

    Sri Hartanto Aji Sasongko New Member

    However, does the same way can be done if the catamaran has asymmetric hull? Or we create the mesh manually? Thanks
     
  11. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    The procedure should be the same but, to get rid of doubts, could you show us your hulls?
     
  12. Sri Hartanto Aji Sasongko
    Joined: Jul 2018
    Posts: 4
    Likes: 0, Points: 1
    Location: Indonesia

    Sri Hartanto Aji Sasongko New Member

    I make that model from Rhino.
     

    Attached Files:

  13. Sri Hartanto Aji Sasongko
    Joined: Jul 2018
    Posts: 4
    Likes: 0, Points: 1
    Location: Indonesia

    Sri Hartanto Aji Sasongko New Member

    I think there are too many points in that model considering that I just selected all of the object while exporting.
    upload_2018-7-4_15-51-29.png
     
  14. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    There are too many points, effectively, which makes working with the model very slow. Also some surfaces seem not to be correct. See picture.
    Work on Rhino, if you prefer, but try to make the surfaces as simple as possible. Avoid abusing the trim between surfaces. In this forum we have seen frequently that the export from Rhino to MaxSurf can have problems.
     

    Attached Files:


  15. Sri Hartanto Aji Sasongko
    Joined: Jul 2018
    Posts: 4
    Likes: 0, Points: 1
    Location: Indonesia

    Sri Hartanto Aji Sasongko New Member

    Okay. Btw those black lines appear from the IGES. Yes I'm sorry, my bad :) . but my first model which is the symmetric cat seems ok, probably. I also make that from Rhino -> IGES -> Maxsurf and the meshing result exactly like the discussion above. I just have a problem with asymmetric cat mesh.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.