Traditional "Rule of Thumb" methods

Discussion in 'Boatbuilding' started by gonzo, Jul 16, 2017.

  1. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    This thread is about describing traditional rules of thumb. If you want to criticize or otherwise argue about these methods, please don't post in this thread; start a new one. Thanks.
    There are still many places in the world where shipwrights build by rules of thumb. These have evolved through a process of small changes. Experienced shipwrights build vessels that are adequate for the intended use and usually from local materials. Some techniques are odd to those not used to them. For example, frames that are not symmetrical port and starboard, or spaced equally.
     
    hoytedow likes this.
  2. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    Some old Rules of Thumb from the Vikings . . .

    Vikingskip og norske trebåter = Viking ships and Norse wooden boatsHow to build a Viking ship & Principles of Norse boat building

    There's still a constant further development of existing Rules of Thumb in shipbuilding and engineering, and even new Rules of Thumb are developed all the time, like in the below example . . . .

    - European Inland Waterway Navigation Conference, 10 - 11 - 12 September 2014, Budapest, Hungary

    - Submission: Delft University of Technology, Department of Ship Design, Production and Operation

    A building cost estimation method for inland ships - - Note: ‘‘estimation method’’ = Rule of Thumb​

    Delft University of TechnologyRepositoryA building cost estimation method for inland shipsPDF = also attached below

    ‘‘ Abstract
    There is very little publicly available data about the building cost of inland ships, especially for ships that have dimensions that differ significantly from those of common ships. Also, no methods to determine the building cost of inland ships are described in literature. In this paper, a method to estimate the building cost of inland ships is presented. Furthermore, the method is used to develop rules of thumb for the cost of inland ships as a function of their length, beam and draught. All material that is presented in this paper is based on or taken from Hekkenberg [2013].
    ’’

    By: Robert G. Hekkenberg
    - Delft University of Technology
    - Faculty: Mechanical, Maritime and Materials Engineering
    - Department: Marine and Transport Technology
    - Mekelweg 2, 2628CD, Delft, the Netherlands

    Publisher: Budapest University of Technology and Economics
    Edit = added ‘‘ Note: ‘‘estimation method’’ = Rule of Thumb ’’ + attached PDF
     
    Last edited: Jul 16, 2017
    hoytedow likes this.
  3. DCockey
    Joined: Oct 2009
    Posts: 5,229
    Likes: 634, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

    The center of lateral effort, center of lateral resistance and "lead" between them for balancing sail boats can be considered as a "rule of thumb" which ultimately is based on experience.
     
  4. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    Some definitions:

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

    Wikipedia: Rule of Thumb

    ‘‘ A rule of thumb is a principle with broad application that is not intended to be strictly accurate or reliable for every situation. It is an easily learned and easily applied procedure for approximately calculating or recalling some value, or for making some determination. It is based not on theory but on practical experience. 1

    Compare this to heuristic, a similar concept used in mathematical discourse, psychology, and computer science, particularly in algorithm design.

    1 "rule of thumb, n. and adj." OED Online. September 2016. Oxford University Press.
    ’’

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

    Merriam Webster dictionary: Rule of Thumb

    ‘‘ - - 1: - - a method of procedure based on experience and common sense

    2: - - a general principle regarded as roughly correct but not intended to be scientifically accurate

    First Known Use: - circa 1658 - - ’’

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
     
    Last edited: Jul 16, 2017
  5. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member


    Interesting how it gives enough information to build the boat. Any shipwright would be able to follow the basic directions. Usually, each modifies it to suit his building preferences and available materials.
     
    hoytedow likes this.
  6. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    Yes, I came across some nice examples of this, I think I'll start a new thread to post these, as I don't want to distract this thread about Rules of Thumb with a lot of Viking Ship building.

    P.S. - ‘‘ I think I'll start a new thread to post these ’’ - DoneViking Ship Building
     
    Last edited: Jul 18, 2017
    hoytedow and gonzo like this.
  7. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    You all post some cool stuff and I thank you.
     
  8. DCockey
    Joined: Oct 2009
    Posts: 5,229
    Likes: 634, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

    Billy Moore builds a traditional Chesapeake Bay deadrise boat without plans or loft.
     
  9. DCockey
    Joined: Oct 2009
    Posts: 5,229
    Likes: 634, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

  10. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    A method I've seen in several areas around the world, is to first lay down a keel and attach a bow stem and transom. Then they place the frames at the widest beam. After, they fill in between while using some battens for fairing. Some of those shipwrights would make fun of me for lofting. They teased me about having to draw a boat before building it. I've learned a lot from both approaches.
     
  11. DCockey
    Joined: Oct 2009
    Posts: 5,229
    Likes: 634, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

    Several years ago I visited a boat builder in Virginia who was building a flat bottom outboard skiff for crabbing. He was working in a shed with a dirt floor and the boat was being built inverted. The stem, keel and transom were in place with the stem and transom fastened to stakes driven into the ground. The stem and keel were straight pieces of timber. The builder said the owner had requested a 2o foot boat but because the timber for the keel was longer he was building a 22 foot boat. A temporary frame representing a section near the middle of the boat was also in place with battens representing the chines and sheer. The building was experimenting with the width of the bottom and amount of flare to find a combination he liked. Then he would build a stronger mold/frame and bend the planks for the sides into place.

    The builder said he could not build a boat using plans and offsets. He and a friend one time had looked through Chapelle's book "American Small Sailing Craft" and saw a Chesapeake Bay skiff they liked. So they looked at the plans, and then built a boat. He said it came out looking like the boat in the plans.
     
  12. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    Here's a "Rule of Thumb" for the "lead" on Schooners from the thread...

    Please see for the sources and/or responses and/or discussion about the above quoted so called ‘‘gold standard’’ the above linked subject thread about "lead" where this as a ‘‘Rule of Thumb’’ for the "lead" on Schooners came from.
     
  13. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)


  14. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    'guesstimate' the displacement

    Thread: - 36' x 16' Cat Hull for Tiny House Project - Need Help Please :) - ---> - Post #26
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.