Lowrance depth gauge to nmea

Discussion in 'OnBoard Electronics & Controls' started by gtflash, Jun 16, 2017.

  1. gtflash
    Joined: Jun 2006
    Posts: 128
    Likes: 0, Points: 16, Legacy Rep: 10
    Location: uk

    gtflash Senior Member

    I have a 7 wire Lowrance depth gauge.

    The wires are
    Red
    Black
    Orange
    Yellow
    Blue
    + 2 shields

    If possible I would like to connect it direct to my nmea 5 wire network.

    The wires are
    Red
    Black
    White
    Blue
    Shield.

    All I want is depth measurement. Which ones to which please.
     
  2. gtflash
    Joined: Jun 2006
    Posts: 128
    Likes: 0, Points: 16, Legacy Rep: 10
    Location: uk

    gtflash Senior Member

    Just to elaborate.

    I have a lowrance xdcr of-wbl transducer. It only uses 3 wires of the five in the cable.

    I want to connect it to the nmea 2000 bus.

    My lowrance style nmea wires are blue white red black and screen/shield. I have a cut off cable from nmea I can wire it too

    Any help appreciated

     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.