Michlet over estimates the total resistance

Discussion in 'Software' started by Andrea Kursetgjerde, May 16, 2017.

Tags:
  1. Andrea Kursetgjerde
    Joined: May 2017
    Posts: 3
    Likes: 0, Points: 1
    Location: Norway

    Andrea Kursetgjerde New Member

    Hi

    Im trying to optimize a trimaran hull, which I later will verify against CFD. I already have som estimations on what the total resistance should be without any changes. From Michlet i get almost the 2x as much. Also, If i which off/on the slender body setting, nothing happens?

    Help please

    - Andrea
     
  2. patrik111
    Joined: Sep 2003
    Posts: 64
    Likes: 2, Points: 8, Legacy Rep: 22
    Location: Sweden

    patrik111 Junior Member

    Have you possibly done your base caser CFD using a symmetry plane and therefore only see the results for half a hull?
     
  3. Andrea Kursetgjerde
    Joined: May 2017
    Posts: 3
    Likes: 0, Points: 1
    Location: Norway

    Andrea Kursetgjerde New Member

    I have used symmetry plane, but I have included this in my calculations. My main hull have a very complex geometry, I have found that this may have caused some problems, any experience with this?
     
  4. Ad Hoc
    Joined: Oct 2008
    Posts: 7,773
    Likes: 1,678, Points: 113, Legacy Rep: 2488
    Location: Japan

    Ad Hoc Naval Architect

    Being estimates...how do you know if this is correct? You need a confirmed baseline datum that is correct and verifiable by several sources, otherwise, you will be chasing your own tail!
     
  5. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    In my humble opinion, all power calculations (and many other calculations of naval architecture) are estimates. So, in my opinion, do not worry about your tail. :)
     

  6. CNair
    Joined: Feb 2017
    Posts: 3
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: US

    CNair New Member

    How do the results of Michel integral based Michlet compare with results using panel based programs using say Rankine source distribution based on say Havelock/Newman green functions? I find Michlet's Wave Resistance prediction about 20-30% lower when compared with model test based predictions for an existing trimaran.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.