Who likes my rerouted hydrolic steering tubes

Discussion in 'OnBoard Electronics & Controls' started by the brain, Feb 4, 2017.

  1. the brain
    Joined: Sep 2016
    Posts: 370
    Likes: 1, Points: 18, Legacy Rep: 10
    Location: AL

    the brain Senior Member

    Who likes my rerouted hydrolic steering tubes

    I fabbed a 1" figure 8 stripe attached to steering tubes PVC will duplicate for inside splashwell


    when I remove engine to redo splash well will relocate controls to upper PVC and remove lower pVC

    The reroute has conciderabley staigtened the tubes hopefully this will minize the clunkieness and looseness w/ steering sys..

    I will wrape tube w/ rubber then shove into PVC then step 2 cover PVC w/ more rubber

    plan more PVC protecting interia steering tubes just under helm station and 90 turn from SW to gunwale probablley fab more figure 8s.
    STB
     

    Attached Files:

    the brain, Feb 4, 2017
    #1
  2. the brain
    Joined: Sep 2016
    Posts: 370
    Likes: 1, Points: 18, Legacy Rep: 10
    Location: AL

    the brain Senior Member

    kindof primitive.

    I tried to obtain these however there builtin to the tubes, I find this out after spending $150. on new tubes.
     

    Attached Files:

    the brain, Feb 19, 2017
    #2
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.