Why not give hulls 'negative camber' on a cat?

Discussion in 'Sailboats' started by Ward, May 7, 2003.

  1. Ward
    Joined: May 2003
    Posts: 29
    Likes: 1, Points: 0, Legacy Rep: 25
    Location: Texas

    Ward Junior Member

    Im just curious why on a catamaran, the hulls, looking head on have paralell centerlines. Why not tilt them inwards (the tops of them) just a bit? Since a catamaran is going to be listing during sail, the hull that its riding on would then be vertical in the water. Im sure there's probably some reason they're not made this way though, otherwise someone would have already done it :p

    I work on cars alot, and i know that an easy way to make a car handle better is to give the front tires negative camber, where the tops of them are farther inboard than the bottoms. During a hard turn, when the car leans a bit, the inside wheel will be vertical and have more tire touching the ground. Would this not benefit a catamaran any?
     
  2. Pieetry
    Joined: Nov 2002
    Posts: 16
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: california

    Pieetry Junior Member

    maby when u sheet the sheets althe way in its going to make hte main be above centerline, *** everything is oriented around the direction the hull is going
     
  3. SailDesign
    Joined: Jan 2003
    Posts: 1,964
    Likes: 148, Points: 73, Legacy Rep: 650
    Location: Jamestown, RI, USA

    SailDesign Old Phart! Stay upwind..

    Many (most?) fast cats have canted centreboards, which gives the same effect, so to speak. Since the section of the hulls is close to circular, the heel won't matter much, as they should be sailed pretty flat (one hull flying, but only just, to keep the sail as upright as poss)

    Steve Baker
     
  4. tspeer
    Joined: Feb 2002
    Posts: 2,319
    Likes: 303, Points: 83, Legacy Rep: 1673
    Location: Port Gamble, Washington, USA

    tspeer Senior Member

    The A-class cats have been using canted hulls for some time, and some cruising cats have canted hulls. Trimarans also use canted hulls for the amas. It's actually a common practice these days.
     
  5. Ward
    Joined: May 2003
    Posts: 29
    Likes: 1, Points: 0, Legacy Rep: 25
    Location: Texas

    Ward Junior Member

    Hmm, I guess they only run a couple degrees of camber then, because from all the racing cats I've seen in pictures, they just look paralell. they must only run a couple degrees.
     
  6. SailDesign
    Joined: Jan 2003
    Posts: 1,964
    Likes: 148, Points: 73, Legacy Rep: 650
    Location: Jamestown, RI, USA

    SailDesign Old Phart! Stay upwind..

    15 degrees on the last A-Class I worked on.....
     
  7. Guest

    Guest Guest

  8. SailDesign
    Joined: Jan 2003
    Posts: 1,964
    Likes: 148, Points: 73, Legacy Rep: 650
    Location: Jamestown, RI, USA

    SailDesign Old Phart! Stay upwind..

    Guest says "For example this cat posted in the gallery by b_rodwell:.........."
    Except that his centreboards are vertical, where I would have expected them to follow the hull cant.
     

  9. robl
    Joined: Jun 2003
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: australia

    robl New Member

    A Class cats have used canted hulls for many years. Some have been up to 15deg. but most have now settled on around 5deg. the downside to using canted hulls is that when both hulls are in the water they present an assymetrical shape, which can be slow.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.