Lake & bay Nova grande hull

Hello everyone
I have an urgent request for a 20 ft lake& bay boca grande hull only
If someone got one or knows somebody who does would be great
Thanks a lot

 

20' boca grande pocket hull

If you haven't already found one. I have mine for sale. I'll post a few pics when I get a chance. It's a 91 hull and has a 2004 mercury 250xs racing motor (548hrs) 82lb Trolling motor, 8ft powerpole.
But if you just want the hull I'm sure I can figure something out.

 

hi Ajr31
thank you for your reply , unfortunately i only need the hull , so i you have one or can locate one for me that would be great but please make sure its a 20 ft and the transom notch pocket is exactly like in the photo attached

regards
mazen

 

20' boca grande pocket hull

That's exactly what I have. I can sell you just the hull. How much are you looking to spend?

 

How much are you asking ?
Can you send some photos pls?

 

20' boca grande

I'm looking to get $17k for the hull. And as soon as I'm done with work I'll post a few pics. That notch is called a pocket hull which makes the boat faster. I just recently stripped the console down and have started fiberglassing the old gauges holes and any scratches and dings. Kinda giving the boat an overhaul and prepping it for SeaDek on the deck of the hull. Was basically gonna redo everything until my buddy came across your post and sent it to me. Anyways just wondering where you were located?

 

I am located in Dubai UAE
What you are asking it way over the budget I have for this hull since there will be lots of other expenses involved
Anyhow if you come across a wayyyy cheaper hull please let me know
I would really appreciate it
Thanks

 

What is your price range? I don't know of any for less than $15k.

 

The one in the photo was sold for 5k

 

Wow! So even at $13k I'd still be way out your range I'm assuming?

 

Yes , I wouldn't mind paying a bit more but not up to that , what I really need it just a clean hull bottom , I do not care about the inside it could be the crappiest from inside even without a anything

 

So my assumptions were right. You just need it to make a mold. Well I completely understand. Well let me know what your top $$ is and I'll think about it. Good talking to ya.

 

There is no way you are going to find a genuine 1990's lake and bay for under $15k. I have a 1993 and wouldn't let it go for under $30k. They are the best flats boats ever made, and they are 40 year+ boats.

 

also the boat in your picture is not a lake and bay boca grande.

that is why it sold for so cheap.