Porkchunker -- New member with a wooden boat project

Discussion in 'Boatbuilding' started by Porkchunker, Feb 5, 2006.

  1. Porkchunker
    Joined: Jan 2006
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Annapolis, MD

    Porkchunker Porkchunker

    Found this site after a long search of the internet. I have a Parker 2510 that I use on the Ches. Bay for fishing and an occassional overnight with the boys (they love catching croaker (hardhead)). My second boat is a wooden fishing boat my father built in 1958. I was 6 years old when he started it and 8 when he floated it for the first time. Here is a link to some pics of it: http://www.thebayguide.com/rec.boats/skopje179.html

    The boat was build from a Canadian 5-ply birch hull--supposedly by a company that build "Mosquito Bombers" for the British during WWII. Wish I could recover the name of that company. Anyway, he took plans from a 1950's edition of Popular Mechanics, and basically build an early version of what has become a "bass boat." Of course the modern bass boat bears no resemblence to the early versions. In the 50's someone decided to take the common open row/fishing boats, and build them up with more substantial gunwhales, some bulkheads with hatch covers for coolers, and raised decks with pedestal seats. Dad covered the hull with one sheet of fiberglass cloth and resin. Also soaked stringers and the areas below the deck with resin and one sheet of cloth. Everything above the decks were stained and varnished.

    When I was a small tyke, I used to lay on top of the hatch covers holding a rod while Dad trolled for Trout and Walleye in Lake Glendo and Gurnsey on the S. Platte River in WY. I later learned to water ski behind the twin 1960 Johnson 18 hp rope-start powered boat. When I got into Junior High, it would no longer get me out of the water (something about the power to weight ratio of the person being pulled :) ). Dad took good care of the boat all these years, and about 4 years gave it to me.

    The motors were showing their age, and I already had two teenage boys, who were already too big to ski behind the orignal power. So...I repowered with a couple of 1977 Johnson 35 hp electric-start motors. By 1977, Johnson had figured out how to double the hp in the same size package, so the newer motors fit perfectly.

    We have had three great boating/fishing seasons with it. Unfortunately, while trailering through a little town in VA, I ran over a curb with the trailer--breaking the tire--and damaged the glass on the keel. Water intruded into the keel, swelling the glass.

    I discovered the damage early (within the first 30 days), stripped her down to the bare wood, turned her on her back, peeled the glass of the keel, let her dry for about 6 mo., and now in the process of restoring her. Will keep you posted as I progress, and will probably ask a lot of questions along the way.

    Porkchunker http://www.thebayguide.com/rec.boats/skopje179.html
     
  2. Porkchunker
    Joined: Jan 2006
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Annapolis, MD

    Porkchunker Porkchunker

  3. longliner45
    Joined: Dec 2005
    Posts: 1,629
    Likes: 73, Points: 0, Legacy Rep: 505
    Location: Ohio

    longliner45 Senior Member

    hey chunker; neat boat Im green with envy ,thats where I want to be. love the storage space and ice box I also love to catch croakers. watch out for them damn oyster toads !
     
  4. Oyster
    Joined: Feb 2006
    Posts: 269
    Likes: 9, Points: 0, Legacy Rep: 104
    Location: eastern United States

    Oyster Senior Member

    By some chance have you read up or followed up on this lead about the builder from this operation? This is a pretty interesting place to start.

    http://www.commonwealthplywood.com/en/mosquito.shtml
    Head Office

    Commonwealth Plywood
    15, boul. Labelle, P.O. Box 90,
    Ste-Therese, Quebec
    Canada J7E 4H9
    Tel: (450) 435-6541
    Fax: (450) 435-3814
     
  5. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    I've seen a lot of that style of boat as a kid growing up in the same area. I use to sail by the Proving Grounds, getting chased out on several occasions. Many of those boats had forward controls and a windshield, but most were just open, midship helm configurations, like yours. They were simply built, ply over sawn frames, yours seems an excellent example of the breed.

    Drying her out is good. If the bottom is sheathed and over the chines, check for water intrusion in these areas as well. It's not uncommon to find soft spots in both the topside and bottom planking along the chine log, because the sheathing has worked loose or sheered away, but still looks to be in contact with the surrounding surface. As you can guess this permits moisture to get into the planking and work it's ugly magic. It's nice to see epoxy set sheathing, as most were poly and the skins didn't hold up very well. Typical locations for this delaminating would be within a few feet of the transom along the chine.
     
  6. Porkchunker
    Joined: Jan 2006
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Annapolis, MD

    Porkchunker Porkchunker

    Oyster,

    Thanks for the pointer. I sent them an e-mail with a link to some pics of the hull, and asked if they built the hull. Will let the group know the results.

    Porkchunker
     
  7. mmd
    Joined: Mar 2002
    Posts: 378
    Likes: 16, Points: 0, Legacy Rep: 309
    Location: Bridgewater NS Canada

    mmd Senior Member

    Porkchunker, I may be able to identify the builder of your hull. Are you able to take some photos of specific features of the boat and forward them to me?
     

  8. Oyster
    Joined: Feb 2006
    Posts: 269
    Likes: 9, Points: 0, Legacy Rep: 104
    Location: eastern United States

    Oyster Senior Member

    Porkchunker, please send me a PM, or change your profile to receive them, and I will respond offline to your inquiry about painting.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.