1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

20' Bay/Reef center Console Molds

Discussion in 'Boat Molds' started by FlatsGuy1120, Aug 14, 2015.

  1. FlatsGuy1120
    Joined: Dec 2013
    Posts: 1
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Miami

    FlatsGuy1120 New Member

    Accepting offers on 20' center console molds. Hull measures 19'6"
    Beam is 8'6". Only 2 boats have been pulled from these molds. They are
    in excellent condition and ready for immediate production. Steel frame, plugs were CNC cut. Includes all drawings and design specs, stringer diagram, fuel tank specs, lamination schedule, labor analysis, cost sheets. Also includes a pre cut stringer/bulkhead kit, deck core and transom. Console mold as well.

    Boat is extremely spacious, rear seating, lots of storage, very well thought out design. 100% ready to build, start laminating tomorrow if you want. Bay boats are smoking hot right now, here is your opportunity. This boat has some serious potential to build a lucrative business. Make your move.

    Mannys32@aol.com
     

    Attached Files:

  2. Edge Powerboats
    Joined: Jan 2015
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florida

    Edge Powerboats New Member

    What's the price? I was looking at the big brother to this and was offered it before. It's from Graves correct?
     
  3. FlatsGuy1120
    Joined: Dec 2013
    Posts: 1
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Miami

    FlatsGuy1120 New Member

    Graves? Not as far as I know. These molds came from South Carolina. We got them from a gentleman in the aerospace industry. I'm open to reasonable offers, shoot me an email.
     
  4. Edge Powerboats
    Joined: Jan 2015
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florida

    Edge Powerboats New Member

    It's still posted on here along with the other mold they have for sale. It's the sister mold to the 25. Same console. Did you buy both molds?
     
  5. FlatsGuy1120
    Joined: Dec 2013
    Posts: 1
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Miami

    FlatsGuy1120 New Member

    Oh ok we are talking about the same thing then. I got it from the guy who baught both. I only have the 20. The 25 needed work. Layout wasn't really to my liking.
     
  6. Cobra1
    Joined: Feb 2008
    Posts: 87
    Likes: 0, Points: 6, Legacy Rep: -2
    Location: Az

    Cobra1 Junior Member

    What's the price?
     
  7. jpcmarineworks
    Joined: Jul 2015
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Fort Lauderdale

    jpcmarineworks New Member

    Name a price....
     
  8. Cobra1
    Joined: Feb 2008
    Posts: 87
    Likes: 0, Points: 6, Legacy Rep: -2
    Location: Az

    Cobra1 Junior Member


    I won't do that, you have a price in mind, and I don't know what it is. What they are worth to you might be way off what I think they might be worth to me, plus the shipping on my end, to the bloody hot desert of Az. You can send me the price via a Private Message if you like. You could even stipulate a commission if you wanted to??
     
  9. Gid
    Joined: Sep 2015
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ontario

    Gid New Member

    Still have the mold ??
     
  10. FlatsGuy1120
    Joined: Dec 2013
    Posts: 1
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Miami

    FlatsGuy1120 New Member

    Yes I still have them. I'm looking to get at least 20k
     
  11. Edge Powerboats
    Joined: Jan 2015
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florida

    Edge Powerboats New Member

    Come on man. Both the 25 and this were 6500 for both.
     
  12. FlatsGuy1120
    Joined: Dec 2013
    Posts: 1
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Miami

    FlatsGuy1120 New Member

    First off I didn't buy them from the original poster. I was referred to the person that bought it through a friend. And I paid significantly more that 6500 for the 20 by itself. I also had all the engineering done which wasn't cheap. If you want to find a toasted up mold for $2500 from some starving bankrupt boat builder there are plenty out there. But thats not me. Its a very nice mold, nice design. For a semi established builder with the means to build and distribute this boat properly, 20k is a drop in a bucket.
     

  13. FlatsGuy1120
    Joined: Dec 2013
    Posts: 1
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Miami

    FlatsGuy1120 New Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.