Shipping Container "Shantyboat"?

Discussion in 'Metal Boat Building' started by KenH, Jan 14, 2006.

  1. SamSam
    Joined: Feb 2005
    Posts: 3,899
    Likes: 200, Points: 63, Legacy Rep: 971
    Location: Coastal Georgia

    SamSam Senior Member

    If you'll look at Ken H's original post he lays out his idea and then says " OK guys- pick apart my idea". That's a very good move on Ken's part and that's what people are doing. He wants to know the possible downside to his idea. You say " Shall we people never learn? ". I have no problem with him building it, and if he does I sure would like for him to keep us posted on the project, as a great way to learn is from other peoples mistakes. I have never built a shantyboat from a shipping container, but I have made mistakes and have gained some knowledge that tells me there are good possibilities for problems with this idea. I've gained enough knowledge to know that, sure, it could absolutely be made to work, but I also ask "Why bother?". It seems the problems will outweight the advantages, not only right away but also in the long run. I can't quite place this idea as regards 'Form follows function versus function follows form', but I would still place it in the 'Butt ugly' column. Sam
     
  2. safewalrus
    Joined: Feb 2005
    Posts: 4,742
    Likes: 78, Points: 0, Legacy Rep: 659
    Location: Cornwall, England

    safewalrus Ancient Marriner

    What a fantastic idea, lets all live in containers - well there OK until someone opens the door!

    Actually the idea is not bad, as long as the insulation is great and the container is stuck on to a dumb lighter or barge!

    Why do I get a feeling of deja vu here? :rolleyes:
     
  3. Deering
    Joined: Feb 2005
    Posts: 481
    Likes: 25, Points: 18, Legacy Rep: 44
    Location: Juneau, Alaska

    Deering Senior Member

    I like George Allard's idea of adding pontoons on the sides. Pipe or watertight boxes. Forget the concrete ballasting. Gives you walk-around decks too.

    Don't containers have corrugated walls? I'm just guessing here, but I suspect corrugations won't do much for propulsion efficiency.
     
  4. safewalrus
    Joined: Feb 2005
    Posts: 4,742
    Likes: 78, Points: 0, Legacy Rep: 659
    Location: Cornwall, England

    safewalrus Ancient Marriner

    Neither do open doors or square boxes!

    Considering all the negatives it would appear that a lot of time is being wasted over nothing - good concept Ken but....

    Now I have this idea that if I take my granny's washtub and put an outboard on the back.......drone......drone .........zzzzzz
     
  5. Pavel
    Joined: Jan 2005
    Posts: 21
    Likes: 1, Points: 0, Legacy Rep: 15
    Location: Ireland

    Pavel Junior Member

    I agree ... lets think about skip :)
     
  6. SamSam
    Joined: Feb 2005
    Posts: 3,899
    Likes: 200, Points: 63, Legacy Rep: 971
    Location: Coastal Georgia

    SamSam Senior Member

    Use her table.
     

    Attached Files:

  7. nevadamike
    Joined: Jan 2006
    Posts: 12
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Spring Creek, Nevada

    nevadamike Junior Member

    interesting idea..... but probably not feasible. why not buy used, discarded pontoons (some website or another has lots of 'em), go it from there? much more stable.. blah... blah blah... . :) . Mike.
     
  8. safewalrus
    Joined: Feb 2005
    Posts: 4,742
    Likes: 78, Points: 0, Legacy Rep: 659
    Location: Cornwall, England

    safewalrus Ancient Marriner

    Sam, I like it, one of the more sensible uses of a dining table (her indoors don't think so!):D
     
  9. KenH
    Joined: Jan 2006
    Posts: 4
    Likes: 1, Points: 0, Legacy Rep: 15
    Location: Kwajalein Atoll, Republic of the Marshall Islands

    KenH New Member

    NevadaMike. Part of my idea was to use what's readily available cheap. Every major and minor port has thousands of these boxes sitting there, near the water. I'd probably end up paying more for shipping and pontons than for a good container on the riverbank. I'm not convinced pontoons are that good of idea anyway. If I decide to build something else it would be more "boaty" than a pontoon raft.

    I kinda like the idea of outriggers. it would certainly make the thing fit in more with local (Micronesian/Polynesian) ideas of what a boat should be like. I'd need to do the calcs as to how large then would need to be to be useful stabilizers. The ama platform would be useful "patio" and work space, perhaps for container or hydroponic gardening.
     
  10. KajWestergard
    Joined: Jan 2006
    Posts: 21
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Stockholm

    KajWestergard Junior Member

    Now there KenH

    Now there KenH,
    "Hydrophonic gardening" ?

    Naughty - naughty :D

    The container seems like a fun idea.
    Maybe you could ballast the container so it floats
    lying on a corner.
    More boatlike with a V-bottom.
    You could still use the outriggers (=pontoons)
    may I suggest a row of oildrums.

    Keep us posted.

    Kind regards
    Kaj Westergard (from a vintery Stockholm)
     
  11. Moss
    Joined: Jan 2006
    Posts: 11
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: RSA

    Moss Junior Member

    Containers are widely used in South Africa's shantytowns as temporary (and sometimes not so temporary) offices, classrooms and even homes. Haven't seen any afloat yet, but then I haven't been been to Cape Town during the wet season for a while .....
     
  12. george allard
    Joined: Jul 2005
    Posts: 61
    Likes: 2, Points: 0, Legacy Rep: 7
    Location: kentucky

    george allard Junior Member

    There are several companies, in the US, renting portable jobsite offices, built from containers.
     
  13. safewalrus
    Joined: Feb 2005
    Posts: 4,742
    Likes: 78, Points: 0, Legacy Rep: 659
    Location: Cornwall, England

    safewalrus Ancient Marriner

    But are they seagoing offices?
     
  14. jerryniff
    Joined: Dec 2005
    Posts: 17
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florianopolis, SC Brasil

    jerryniff Junior Member

    In my limited experience, in regard to containers, they are either 20' or 40'.
    You might consider building a plate steel barge and set the container or containers inside it. It shouldn't be difficult to calculate the cost of such a venture and it sure would be easy to manufacture. You would do far less cutting of the container. On the surface the barge seems to me like an easier and more sea worthy approach.
    Gerald
     

  15. Wellydeckhand

    Wellydeckhand Previous Member

    MMM........ Container office ....done that
    MMM........ Barge...................done that
    MMM........Container turn barge..........?

    Messy and maybe killing time for someone who is bored to death. Unless this just a thoery type of project.........

    Used container cost US$1000 in Indonesia.
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.