1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

Boat Project wanted

Discussion in 'Boat Molds' started by Bill Dunn, Dec 5, 2004.

  1. Bill Dunn
    Joined: Aug 2004
    Posts: 32
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Port Washington WI

    Bill Dunn Junior Member

    I am looking for a boat project up to 25' preferribly a sport cruiser. I would be interested in purchasing or teaming up on the molds and production.
     
  2. jcedarburg
    Joined: Feb 2005
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florida

    jcedarburg Junior Member

    I have a 30" Rybo full cabin hull for sale.It is in Milw.Would you be interested in it? Emailto jcedarburg@aol.com
     
  3. boat182
    Joined: Jun 2005
    Posts: 30
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Texas

    boat182 Junior Member

    I am closing down my boat company, would you be interested in purchasing it? Contact me to discuss the details or send me your e-mail address so that I can send you an asset list.

    Jay
    compassboats.com
    956-237-8075
     
  4. T.N.Todd
    Joined: Dec 2005
    Posts: 23
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: New Zealand

    T.N.Todd Junior Member

    Hi there,
    We are boat manufacturers in New Zealand. We may have a boat that could be of interest. It is 23feet x 8ft 2 in beam. Even though it sounds small, it is an extremely roomy cruiser. It comfortably sleeps 4 people, has full galley with 6 ft headroom. It can be fitted with single or twin outboards or with single stern drive. It is an extremely good rough water boat. NZ Propeller magazine have done a boat review and rated it as outstanding in its class. If you are interested, have a look at my web site www.tnt-sport.co.nz
     

    Attached Files:

  5. RANCHI OTTO
    Joined: Apr 2005
    Posts: 1,042
    Likes: 37, Points: 0, Legacy Rep: 535
    Location: TRIESTE (ITALY)

    RANCHI OTTO Naval Architect

    Something like that ?

    ASD (Arrow System Design) hull
    Speed + 40 knots
     

    Attached Files:

  6. T.N.Todd
    Joined: Dec 2005
    Posts: 23
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: New Zealand

    T.N.Todd Junior Member

    Asd

    Could You Please send more information most interested is it own design:cool:
     
  7. pitcha
    Joined: Dec 2004
    Posts: 7
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Ukraine

    pitcha Junior Member

    Attached Files:


  8. Manoj Silva
    Joined: May 2006
    Posts: 15
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Colombo- Sri Lanka

    Manoj Silva Junior Member

    Hi Bill,
    I am From Sri Lanka, We have Just Ventured into Manufacture of Rotational Moulded Boats. We are Looking for New Distributors, and Partners to Expand our Product Range. If you are in a position to Supply Mould we can run these in our Machine and do PE Boats up to 6 Meter leagth for you. Otherwise we can do boats under you Bradname and ship it there for you to market.
    Our Prices will be very competitive,and boats can be customised using various accessories.

    If this Interest you do get in touch with us.

    Regards,
    Manoj Silva
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.