1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

2 yanmar 4lha-stp and bertram restoration for sale

Discussion in 'Marketplace' started by huntress1, Jul 21, 2012.

  1. huntress1
    Joined: Jul 2012
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: michigan

    huntress1 New Member

    Yanmar 4lha-stp still in crates and never hooked up
    ZF63A 1.5:1 trannies
    80A alternators
    oil drain kit
    motor mounts and panels



    The following is a list of parts and changes/additions done in the process. The intended configuration of the final product was a flybridge style boat with open rear bulkheads and a front/port standing head location. Where possible, all wood was replaced with either coosa or dyvinicell. Side and front windows removed and replaced with coosa. Custom window frames built to capture fixed glass forward and sliding panel aft. Custom motor boxes and integrated walkway midships were built and are very strong. Designed to hinge to stern. Also note in the pictures a carbon fiber beam to reinforce the bridge deck. All construction done with 17 oz glass and System Three Epoxy. Vacuum bagging done wherever possible. Boat was originally a freshwater charter in Lake Michigan and has been in my barn for 3 years. Inside of hull/bilge stripped and painted with 2 part rustoleum epoxy. Stringers and bulkheads checked for moisture and extra tabbing added where needed.

    Original parts:
    cushions
    galley frp insert with sink
    head frp insert with sink
    lower station panel and controls
    dinette table
    misc panels and cabinets
    doors
    plexiglass windscreen
    front and side windows with aluminum frames

    Hardware:
    bridge rails and seat supports
    bow rails(mostly complete)
    cockpit safety rails
    8 rod holders
    struts
    props(original motors were 350 crusaders also for sale separately)
    swim platform

    Rebuild details:
    heavy duty oversize composite rudder shelf
    deck removed and recored wherever needed
    liner removed and recored
    strut pads oversized and replaced with coosa
    transom hardware locations reinforced to accept hardware
    rfp shaft logs
    reinforced and beefed up engine beds with coosa
    battery shelves
    custom air boxes and vents for proper air to diesel motors
    all below waterline gelcoat peeled
    custom motor boxes and walkway

    50000 for entire package
    will separate motors for 17000 each

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
    Last edited: Jul 26, 2012
  2. tjoslyn
    Joined: Sep 2012
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Hawaii

    tjoslyn New Member

    Mr. Tom J

    Interested in your 4LH's for sale...Still have them. Please let me know. joslynt001@hawaii.rr.com Thanks. TJ
     
  3. tjoslyn
    Joined: Sep 2012
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Hawaii

    tjoslyn New Member

    Tj

    You can also call me at 808 232 9398 and leave a message, or send me your phone number. Thanks. TJ
     
  4. tjoslyn
    Joined: Sep 2012
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Hawaii

    tjoslyn New Member

    Sorry the number is 808 232 9298. Thanks TJ
     
  5. tjoslyn
    Joined: Sep 2012
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Hawaii

    tjoslyn New Member

    Want to contact you. please call 808 232 9298, Thanks TJ
     
  6. strico
    Joined: Jan 2013
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: sc

    strico New Member

    call. would be interested in motor

    I am interested in the engines if still available. Call Joe at 843-345-6100
     

  7. trikpony
    Joined: Oct 2013
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: New York

    trikpony New Member

    Engines still for sale?

    I would like to know if you still have these engines? If so please call me 631 764 0157. I am in New York.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.