Inflatable inboard question

Discussion in 'Sterndrives' started by Dvorocks, Jun 17, 2012.

  1. Dvorocks
    Joined: May 2012
    Posts: 8
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Usa

    Dvorocks Junior Member

    Im I the process of building a inflatatable catamaran style boat 17ft
    I have been searching for a diesel outboard when I came across a great deal on a 20hp inboard diesel.. I'm not familiar with inboards at all.. Is this a good idea?
    Boat is going to be used to cruise on rivers and lakes mostly.. Also would like it to be able to go in shallow water
     
  2. IMP-ish
    Joined: Jan 2011
    Posts: 389
    Likes: 9, Points: 18, Legacy Rep: 150
    Location: united states of america

    IMP-ish powerboater

    An outboard can be trimmed and tilted up for shallow water and beaching.
     
  3. Dvorocks
    Joined: May 2012
    Posts: 8
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Usa

    Dvorocks Junior Member

    I know that is why I wanted an outboard .. My question is what about an inboard? Was reading about jet drive but don't think 20hp diesel would work with one
     
  4. WestVanHan
    Joined: Aug 2009
    Posts: 1,373
    Likes: 56, Points: 0, Legacy Rep: 746
    Location: Vancouver

    WestVanHan Not a Senior Member

    Evinrude even named their jet outboards according to the loss ie. 50/35 meaning the engine was 50 hp but at the bottom it was the equivalent of a 35 hp prop unit. They had a 125/90 and other similar IIRC.


    Combine that with the 20 hp peak hp diesel which probably weighs about 150 pounds,fooling around with shafts,seals,steering,etc and is likely 15 continuous you'd be getting maybe 10hp equiv. so you may as well throw on a 10 hp outboard to get the same speed with no hassles.

    But if u have a lot of shallow water use..
     
  5. Mick@itc
    Joined: Jan 2011
    Posts: 98
    Likes: 4, Points: 0, Legacy Rep: 49
    Location: Melbourne

    Mick@itc Junior Member

    I was wondering how you would inflate a motor!!:DY
     
  6. IMP-ish
    Joined: Jan 2011
    Posts: 389
    Likes: 9, Points: 18, Legacy Rep: 150
    Location: united states of america

    IMP-ish powerboater

    I'd like to see a pic of the boat.
    Putting a single inboard on an inflatable catamaran isn't something you see every day!
    Would probably have to be all custom fabricated.
    Could be fun.
    It's adding a lot of complication and time over a tried and true gas outboard with a warranty.
     

  7. jonr
    Joined: Sep 2008
    Posts: 721
    Likes: 11, Points: 0, Legacy Rep: 57
    Location: Great Lakes

    jonr Senior Member

    I would argue that an inflatable is never the boat with the least draft. For that, you want a broad, flat, rigid surface. RIB could be OK.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.