Best rough water hull you know.

Discussion in 'Powerboats' started by xarax, Aug 5, 2006.

  1. KCook
    Joined: Jan 2003
    Posts: 171
    Likes: 2, Points: 0, Legacy Rep: 13
    Location: Arizona

    KCook Senior Member

  2. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

    Thanks KCook,

    A very interesting series of posts there.

    Pericles
     
  3. MrHysucat
    Joined: Apr 2012
    Posts: 22
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Cape L' Agulhas/South Africa

    MrHysucat Hysucat Evangelist

    In practice the Hysucat seems to skip over the swells if you maintain sufficient forward momentum.

    You just have to love those "wave orbital velocity fields". :D

    Yikes this is a bit old .... might get accused of raising the dead and get burned as a witch. :eek:
     
  4. Easy Rider
    Joined: Oct 2009
    Posts: 920
    Likes: 46, Points: 0, Legacy Rep: 732
    Location: NW Washington State USA

    Easy Rider Senior Member

    Here's a boat I designed in the 70s that may be of interest. It's ultra light displacement. 28 X 9'2". Plywood. 55 hp OB. 12 to 14 knots.

    The hen scratch showing lines is a bit different than the boat that got built. I survived in 2 story size waves w some breaking seas.
     

    Attached Files:

    Last edited: Apr 20, 2012
  5. J Feenstra
    Joined: Jan 2012
    Posts: 79
    Likes: 6, Points: 0, Legacy Rep: 100
    Location: The Netherlands

    J Feenstra Junior Member

    why not extend the bottom hull so your stem angle has like an 80 degree angle with the waterline. You can still deflect the spray rail in the configuration you made, but the longer hull might make for an even smoother ride.

    Good idea?
     
  6. Easy Rider
    Joined: Oct 2009
    Posts: 920
    Likes: 46, Points: 0, Legacy Rep: 732
    Location: NW Washington State USA

    Easy Rider Senior Member

    J Feenstra,
    The boat was originally designed with a steeper stem but I thought the weak link was the low volume in the bow so in order to find out if that was going to be a problem I extended the bow during construction thinking if I did'nt have a problem w the extended bow I did'nt have a problem. Turned out to be a non-issue.
    In quartering following seas the forward end of the boat lacked stability but the stability of the stern kept things in control.
    The boat did not perform well w much weight aboard. It was and really needed to be light.
    It's shape permitted it to be very light and also strong. In strong head winds and seas it had a tendency to become airborne and 50 knot head wind was very dangerous. It wanted to go over backwards.

    Easy Rider
     
  7. J Feenstra
    Joined: Jan 2012
    Posts: 79
    Likes: 6, Points: 0, Legacy Rep: 100
    Location: The Netherlands

    J Feenstra Junior Member

    So, in your opinion fast hull form with an steeper stem will increase the head sea performance, but will mess up the quarter sea performance. Do you have any indication how mucht this will be?

    I am designing a planing hul form with a fairy large payload capacity, so going airborne won’t be an issue.
     
  8. daiquiri
    Joined: May 2004
    Posts: 5,371
    Likes: 258, Points: 93, Legacy Rep: 3380
    Location: Italy (Garda Lake) and Croatia (Istria)

    daiquiri Engineering and Design

  9. J Feenstra
    Joined: Jan 2012
    Posts: 79
    Likes: 6, Points: 0, Legacy Rep: 100
    Location: The Netherlands

    J Feenstra Junior Member

  10. Lee01
    Joined: May 2012
    Posts: 36
    Likes: 1, Points: 8, Legacy Rep: 10
    Location: Italy

    Lee01 Junior Member

    Last edited: May 16, 2012

  11. MrHysucat
    Joined: Apr 2012
    Posts: 22
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Cape L' Agulhas/South Africa

    MrHysucat Hysucat Evangelist

    Looks pretty neat. Thanks for the video Lee01 ..... and welcome to the Forum.:D
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.