1986 four winns sole and stringer replacement

Discussion in 'Boatbuilding' started by archiechefaps42, Feb 4, 2012.

  1. archiechefaps42
    Joined: Feb 2012
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: tallahassee fla

    archiechefaps42 Junior Member

    hello everyone I have a 1986 four winn and I have to put floor and stringer in, I need to know what size wood to used 1/2 or 5/8 plywood. I also would like to know what is a good web to order material from need your help my fellow boater.
     
    Last edited by a moderator: Feb 6, 2012
    archiechefaps42, Feb 4, 2012
    #1
  2. FMS
    Joined: Jul 2011
    Posts: 611
    Likes: 22, Points: 18, Legacy Rep: 227
    Location: united states

    FMS Senior Member

    Match what was there in overall dimension and fiberglass thickness.

    It worked for the past 20 years and will work for another 20.

    Otherwise, post the size of the boat and engine.
     
    FMS, Feb 6, 2012
    #2
  3. mctaggert
    Joined: Feb 2012
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: NC, USA

    mctaggert Junior Member

    I'd go with what FMS says and simply replace what was there. Any good online boatbuilding source will work for epoxy, fiberglass and fasteners. I'd use exterior ply from the lumberyard for stringers, especially if you'll be covering it in glass.
     
    mctaggert, Feb 6, 2012
    #3
Loading...
Similar Threads
  1. mwsBlake

    HELP!!!! 1986 Ranger 370v Restore

    mwsBlake, Jan 24, 2014, in forum: Boatbuilding
    Replies:
    1
    Views:
    2,664
    PAR
    Jan 25, 2014
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.