ROUND BILGE and DEEP VEE

Discussion in 'Hydrodynamics and Aerodynamics' started by abdo, Dec 4, 2011.

  1. abdo
    Joined: Dec 2011
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: china

    abdo Junior Member

    hello every one . is there any one have papaer or document about comparaison between deep vee hull and Round bilge is seakeeping . in english please .
     
  2. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    You have other posts with the same question. Seakeeping is the behavior of a vessel under certain weather conditions. It depends on many variables and on the SOR. For example, on a search and rescue vessel it would be the ability to self-right after a knockdown or rollover. A motoryacht is designed to be comfortable. Depending on the SOR, expectations are very different. You have to decide what the intended use will be.
     
  3. cyclops2
    Joined: Sep 2010
    Posts: 242
    Likes: 8, Points: 0, Legacy Rep: 94
    Location: New Jersy

    cyclops2 Senior Member

    Gonzo

    Send him to the company that still makes the " Moppie " hull design.

    Bingo. Bertrum. Old brain.:eek:
     
  4. Eric Sponberg
    Joined: Dec 2001
    Posts: 2,021
    Likes: 248, Points: 73, Legacy Rep: 2917
    Location: On board Corroboree

    Eric Sponberg Senior Member

    There is probably more written about seakeeping of hard chine planing hulls than round bottoms. Three papers and/or articles that I am familiar with are:

    "Some Considerations in Power Cruiser Design," by George E. Meese, published by SNAME, Spring Meeting, Lake Buena Vista, FL, 2-4 April, 1973.

    "Seakeeping considerations in design and operation of hard chine planing hulls," by Daniel Savitsky and Joseph G. Koelbel, presented as part of a training course to the US Navy, Combatant Craft Division in May 1978. It was published in The Naval Architect, journal of the Royal Institution of Naval Architects in the UK, March, 1979.

    This second reference was further developed by SNAME in Technical and Research Report #R-42, "Seakeeping of Hard Chine Planing Hulls," by Savitsky and Koelbel, November 1992.

    Don't forget the book "High Speed Small Craft" by Peter DuCane, first published in 1951, fourth edtiion 1974, by David & Charles (Holdings) Ltd. in the UK. It discusses mostly hard chine planing hull forms, although early on gives some insights into round bottom hull forms.

    If you understand the discussions of hard chine planing hulls, you'll gain some insight into other types of hull forms. The SNAME and RINA articles you may be able to buy direct from those organizations. The DuCane book comes available from time to time at specialty reprint stores, such as DN Goodchild or J. Tuttle Maritime Books.

    I hope that helps.

    Eric
     
    1 person likes this.
  5. cyclops2
    Joined: Sep 2010
    Posts: 242
    Likes: 8, Points: 0, Legacy Rep: 94
    Location: New Jersy

    cyclops2 Senior Member

    Some marine people have a fantastic understanding of boats.

    Peter Du Cane is my hero. :)
     

    Attached Files:

  6. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    "Naval Architecture of Planning Hulls" by Lindsay Lord might help.
     
  7. troy2000
    Joined: Nov 2009
    Posts: 1,738
    Likes: 170, Points: 63, Legacy Rep: 2078
    Location: California

    troy2000 Senior Member

    Was the OP talking about planing hulls? I don't generally think of either round-bilged or deep-vee hulls in that category....
     
  8. abdo
    Joined: Dec 2011
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: china

    abdo Junior Member

    Thank you MR Eric Sponberg . i think your documents very useful for me and you understant what i want but i tried to download them from internet . i can not . do you have some direct links ?
     
  9. abdo
    Joined: Dec 2011
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: china

    abdo Junior Member

  10. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Amazon.com they should have all or most of the books.
     
  11. Eric Sponberg
    Joined: Dec 2001
    Posts: 2,021
    Likes: 248, Points: 73, Legacy Rep: 2917
    Location: On board Corroboree

    Eric Sponberg Senior Member

    For the SNAME T&R Bulletin, R-42, try this:
    http://www.sname.org/libraries/viewdocument/?DocumentKey=debdb0b1-58fe-46e8-a191-e014786bc385

    It is not free, you will have to pay for it. It is US$20 if you are a member or a student, and US$40 if you are not. You can use a credit card.

    The SNAME and RINA articles are attached, scanned versions.

    Eric
     

    Attached Files:


  12. abdo
    Joined: Dec 2011
    Posts: 19
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: china

    abdo Junior Member

    Thank you very much MR Eric Sponberg the first paper is exactly what i want. thanks again
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.