(SOLD) GlasCraft Indy Internal Mix Chopper Gun

I have a GlasCraft Indy Internal Mix Fiberglass spray up equipment with cart and boom...I have had this unit for about 5yrs and bought it as a demo from Polygard in Atlanta...This is a low production unit and was only used once or twice a week at the most for the most part..It is still running now and can been seen in demonstaration.. I just put a New SS Catalyst Line, New Resin Hose , and recently rebuilt the Catalyst slave..As I said this GlasCraft equipment wasnt used everyday all day in a fiberglass shop by someone who is getting paid houly. I owned and operated this equipment and only one other person ever used it at all...Its pretty clean other than the wheels and the cart has some overspray and spillage on them and the Resin pump is leaking very slightly from the top seal around the lube cup. I am going to replace the top seal and clean the unit to a refurbished state if I dont sale it as is. Graco Inc. bought GlasCraft and you can price this unit it is still available New it will come in at just under
$10,000 with the cart and boom, and all...I will take $4,500 as is or I will give it some refurbishing for $5,000...I will palletize the unit and ship it just about anywhere . If you are outside of USA you will have to figure out all the taxes and tariffs and all that kinda of stuff.....If you havent used GlasCraft Equipment , you should know that is top of the line stuff. Eric 678-779-0654

 

chopper gun

Hey Eric, talked to you before once on the gun but the phone connection was not good. Have tried to call the number listed but no luck. Is the gun still for sale?

 

Glas Craft /indy Chopper Gun

I also have a used glas craft chopper gun with the indy head..
iam the second owner of this set up. gun is clean and has extra catalist hoses /
located in wisconsin..
call ken any time.. 920-493-1002 .. used to build bassboats.


PRICE IS $2700.00 GIVE ME A HOLLAR

 

Hey, I'll call you for an email address. How old is the system and will it run today? thanks.

 

yes it will run today.. it is aprox ... 8 years old iam guessing... . i replaced the nose of the gun and other parts aprox 4 years ago .. those parts alone cost me almost a grand.. then i changed the catalist hose over to a differant type hose.. and now you got enough hose for 4 more sets and new fittings also the resin hose was changed to hydrolic hose and is availble at local farm store at 1/4 of the price.. .. (mercurypro@hotmail.com)

 

chop gun is sold..