Vitamin Sea - J-24 Tri Conversion Videos

Discussion in 'Multihulls' started by Delane, Jul 11, 2011.

  1. aussiebushman
    Joined: Oct 2009
    Posts: 283
    Likes: 33, Points: 28, Legacy Rep: 132
    Location: Taralga NSW

    aussiebushman Innovator

    1 person likes this.
  2. aussiebushman
    Joined: Oct 2009
    Posts: 283
    Likes: 33, Points: 28, Legacy Rep: 132
    Location: Taralga NSW

    aussiebushman Innovator

    Sammy

    Just for interest, here is my adaptation of the beam root system. Inside the hull are aluminium frames that extend outside the hull about 150mm. The roots are made from solid Paulownia timber, with aluminium cheek pieces where the struts will be mounted. Each root is secured with 316 stainless bolts to the frames, then bonded and faired with epoxy/microfibres.

    The next stage is to wrap each assembly in 440 gsm cloth and epoxy and fair again. The beams themselves have a a bottom member that is the original A Class beam and a top member made of 100 X 50 aluminium hollow box section. The struts joining the root to the beam to allow it to swing and fold down against the main hull (two top and two bottom on each beam) will be made of 316 S/S. Each ama is asymetrical and the picture shows where the upper and lower beam sections join these at the ama-end (also bolted and glass-wrapped).

    If interested I'll send more pictures of the beams later, but first the outside of the main hull has to be glassed, faired etc, The interior has been done and the fitout completed. The ply "windows" are there to minimise the dust ingress and will be replaced with Plexiglass in the final build stage.

    Hope this is of interest

    Alan
     

    Attached Files:

  3. bruceb
    Joined: Nov 2008
    Posts: 1,275
    Likes: 59, Points: 48, Legacy Rep: 214
    Location: atlanta,ga

    bruceb Senior Member

    a good project hull

    Sammy, It is too bad you are so far away, but I am sure you will find a hull there. I actually think the H-26 is somewhat large for that kind of a project. It does have a lot of space for a 26, but that means it is also big and tall on the outside. I think one reason the J worked as well as it did is that the hull is low-profile and doesn't present that much drag. I think a "sport boat" hull would make a better conversion, but some people told the J owner that it wouldn't work either so don't let "advice" keep you from building:cool: B
     
  4. bruceb
    Joined: Nov 2008
    Posts: 1,275
    Likes: 59, Points: 48, Legacy Rep: 214
    Location: atlanta,ga

    bruceb Senior Member

    details

    Alan, keep the pictures coming if you can. I am quite interested in the folding details and also the beam attachments. It looks as if you have a good plan. B
     
  5. aussiebushman
    Joined: Oct 2009
    Posts: 283
    Likes: 33, Points: 28, Legacy Rep: 132
    Location: Taralga NSW

    aussiebushman Innovator

    To avoid repetition, please see post 223 in the 22 - 24 trimaran thread. It has pictures of the folding beam pattern

    Cheers

    Alan
     

  6. DennisRB
    Joined: Sep 2004
    Posts: 1,270
    Likes: 27, Points: 48, Legacy Rep: 228
    Location: Brisbane

    DennisRB Senior Member

    Nice work Delane. Looks like you are having fun on your new tri.

    Alan. Please make a dedicated thread for your Awesome Tri. :)
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.