Seeking expert boat builders in the Ft. Lauderdale, Miami Florida

Discussion in 'Services & Employment' started by mark57, Feb 17, 2011.

  1. mark57
    Joined: Dec 2009
    Posts: 4
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: ny

    mark57 New Member

    Seeking expert boat builders in the Ft. Lauderdale, Miami Florida area to assist our company in manufacturing HoverCraft / HoverWing Boats. Must be experienced in fiberglass and or composite boat building.

    Please contact Mark at HytechPowerLLC@Yahoo.com or call 954-548-7781.

    Thank You
     

    Attached Files:

  2. ouwl
    Joined: Jun 2006
    Posts: 51
    Likes: 0, Points: 16, Legacy Rep: 10
    Location: wanliouyang2000@hotmail.com

    ouwl Junior Member

    Hi I am engaged in a glass steel ship the manufacturing for many years, but I not in the United States
     
  3. canoedave
    Joined: Jun 2007
    Posts: 10
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ireland

    canoedave Junior Member

    Glassfibre laminator

    Hi,

    I have over 13 years in the glass fibre trade from boat building to composite wind turbine blades. I am in Ireland but would re-locate(as I have done before) Is the job only available to boat builders in America?
     

  4. Padmagireesan
    Joined: Jun 2009
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: india

    Padmagireesan Junior Member

    Fibreglass/Composite Boat building

    Dear Mr.Mark

    I am a Diploma Holder In Mechanical,Passed out in 1973,Aged 59 Having
    25 plus years experience in Fibre glass boat building, products(FRP Piping, Pattern/Moulds.Various insulations)and different Lamination methods(Handlayup/Sprayup/Vaccumbagging/Sandwich) Boats built ranging from 5-20Mtr, Pleasure Yacht, Commercial/Military/ Custom made/Patrol crafts as per Lloyds, ABS, DNV, ABYC, IRS and MS Act. Worked as Manager Engineering Divisional Manager, Manager, Engineer and Supervisor. Experience in FRP Mould making(Lines/Pattern/Mould)Hull mould ,Deck mould and sub assembly moulds.Fibreglass products –Manhole,Water tanks,AC trays,Lining of fresh water tanks etc.Boat building includes supervisionOfHullDeck,SuperstructurelaminationSecondarylaminate,Internalarrangement,(MasterCabin,Mainsalon,Crewcabin,System/Electrical,Sterngear/Main engine installation,Equipments and Fittings,LSA, FFA& LSS/Navigation and Communication,Carpentry, Painting and Varnish (Mainengines I/B Perkins,Lehmanford,Johndeer,MWM,VOLVA,CatterPillar,Telco,Kirloskar etc
    OBM- Mercury,ZuzukJohnson,Evinrude etc. Sterndrive FibreglassincludeLaminateschedule/Scantlings,Combinations,Thicknes calculation/Import of Glassfibre and allied products., BOQ/Material requirement,ProcurementofmaterialsEtc.Sandwich/Corematerials/Insulation
    PVCFOAM/PUFOAM,ROCKWOOLBALSA,PLYWOOD,STRUCTURALWOOD,
    ALUMINIUM,HONYCOMB,CSMAT,WOVENROVING,BIAS,TRIAXIAL,QUAD_AXIAL, POLYESTER, VINYLESTER, EPOXY and PHENOLIC. etc.Other than FRP experience in GRC, Ship Repair, Synthetic Granite, Marble and Aluminum fabrications


    Thanks and Best regards
    K.P.Giri
    Kochi,India.
    E mail: kavasserypg@gmail.com
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.