Volvo 5.7 GS flywheel

Discussion in 'Gas Engines' started by airtime54, Apr 8, 2005.

  1. airtime54
    Joined: Apr 2005
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Huntsville, AL

    airtime54 New Member

    I have a 24' Larson with a Volvo 5.7 GS engine. I suspect that the wrong flywheel was installed on a repair job. I think the next step is to count the number of teeth on the current fly wheel. Can you tell me what the correct count would be? Also, I have heard that this is a GMC Tahoe engine. Can I use this engine flywheel?

    Thanks for any help you may provide.
     
  2. cyclops
    Joined: Feb 2005
    Posts: 1,059
    Likes: 5, Points: 0, Legacy Rep: 38
    Location: usa

    cyclops Senior Member

    Could be wrong flywheel teeth count or wrong starter teeth count or wrong starter. Get a good mechnic to tell you whats now wrong. Do not use the same mechanic again. He does not know what he is doing.
     
  3. gonzo
    Joined: Aug 2002
    Posts: 16,802
    Likes: 1,721, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    If it came out of a Tahoe it won't work on a boat. Make sure the electrics and fuel systems are marine so you don't blow yourself up. You can make it safe, but the boat will perform like a pig. Those engines are set for a completely different use.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.