1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

45ft Mold or plug wanted

Discussion in 'Boat Molds' started by izland, Mar 6, 2010.

  1. izland
    Joined: Mar 2010
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: uk

    izland New Member

    I am after either a mold or a hull of a 40-50ft power boat.
    Preferably in the UK or Ireland, would consider somewhere in Europe though.

    Let me know if you have one for sale or know of one that may be available.

    Thanks
     
  2. captainmac
    Joined: Nov 2010
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Alaska & Washington State

    captainmac New Member

    45' Mold wanted

    My partner and I are liquidating our boatbuilding business. We have molds from 37' to 57' however they are located in the Pacific Northwest U.S., north of Seattle. You can go to http://www.coastalpassagemaker.com to see the boats we build from these molds. We have complete tooling for the CP-45. It is a beautiful boat. The molds used to belong to Delta Marine Industries in Seattle.

    Larry "Mac" McQuarrie
    captainmac@alaskasbestlodge.com
    Phone 907-617-2790
     
  3. KND
    Joined: Nov 2007
    Posts: 26
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: South Africa

    KND Naval Architect

    plugs

    we are situated in South Africa. Our design office will be able to design and use our 5 AXIS cnc machine to cut you a plug and even make the molds. Shipping cost to the UK is really cheap.
    Send me a mail if you are keen to discuss: kobus@navaldesign.co.za
     
  4. GleamingBeam
    Joined: Jan 2011
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Florida, USA

    GleamingBeam New Member


  5. jhonny68
    Joined: Jan 2011
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Naples,FL

    jhonny68 New Member

    I have a 36ft* crusader offshore boat mold
    1 hull, 1 deck , mold 36 ft , beam 10 ft', dead rise 24 degrees draft @ transam 30' width @ transom from chine to chine 8' width is 114' @ top of transom and where the bracket goes is 100' wide and transom is 16 degree. Call for additional info. Giovanni
    239-285-3706 or send me an email at dcastellana1111@aol.com
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.